Activity Stream

Hey guys, unfortunately my 85’ 350X with a 400ex carb has developed an issue where it will die after it’s been at WOT for more than 7-8 seconds. By...

Hello all. First off, I posted this in another thread not knowing I could not attach pics. I apologize for my rookie mistake. I am stumped on...

Hey guys I am completely restoring my 185S and want to switch over to LED bulbs does anyone know a replacement part number that I can use. Thanks in...

Hey yall I got a oddball concern here.i picked up a 84 200x complete last week for a 100 bill.only think it's missing is the clutch cable.its in...

I am new to doing these kinds of things and I am putting together a 1983 250r, are there any other engines that would bolt directly in or does it...

Anyone know of a wide-tire telescoping suspension fork that would fit a 185s without modification, maybe a 250sx or gen one 250R. I have an 83 with...

I’ve been in contact with upp about making curved intakes for the i believe 84-87 yz250 top end To keep the air filter away from the pipe. They will...

I am getting ready to reassemble the bottom end of my '84 200x. How similar are the cases and components to the '86 and later 200x? Thanks. ...

To start with, where do these o-rings go? There were 2 of them and I apparently missed them on disassembly. They were stuck to the inside of one of...

Hello, I am stumped. I believe it's an '81 but there doesn't seem to be anything like it that I could find. No databases show it. Hope this is the...

This upgrade is for the non electric start 185 and 200 ATCs with a 12v AC system. It could be used on other models with the same headlight but...

Testing Thread Posting

I don't have access to a 350X locally, so I could use a little assistance. However, if someone is local to MPLS or the NW suburbs and would be...

Putting the case halves together. Can't find the torque from the manual other than the list that gives torque specs per size. Does 6-8 ft lbs sound...

Good evening. Been working on a 84 200ES. I have tested the stator, pulse generator, and coil. I even checked all the pins in the plug for CDI box....

Are there any ticks to getting a stuck disc brake hub off? I’ve tried heat, pb blaster, puller tool and nothing. My next idea is to press it off but...

Hey all, I’m restoring an 86 250es and I’m having some issue. I cleaned and rebuilt the carb and put it back together. Fired right up and I took it...

Have my bottom end ready to reassemble. Which side do you normally drop the trans, crank, etc. into before putting the halves together? Sent from...

Testing Text Titile

Hello to all Often in the past, technical questions has lead me trolling back to this site over the years so I thought I had better sign up:) ...

I have a big red with what i think is a poor starter. Connections are clean, gears arent binding, battery has full voltage . it engages , but barely...

Hello! I am in dire need of a seat for a 2nd gen 125m I.e. 1986 1987.dont care for the condition as long as the the pan is okay.ill pay good money.

Hello, I am looking for any information on the Parrot green paint code. I've looked through the forums and I was unable to find a paint code...

Yo life update im now a 2 year certified Ducati tech AMA. also i still have my trike......somewhere lol i have to get that back together. ...

I am in need of advice, or a part outlet, for the CDI Module for an 85 Big Red 250ES. Find lots of two plug square, but only round are not for this...

I'm looking for the decompression cable if anyone cqn point me to the right source

Hey all, New guy finally registering and getting some wrenches thrown at my old 200M. I bought it probably 20 years ago with it running but...

What are the differences between the atc110 and atc90 carbs. Mine is a pb 20c. Is there a intake size difference.

Hello! looking for a friend