Activity Stream

Yeah, I know carbs are to be big bucks. I’m just looking to get another 3.5 years out of my chinesium junk ��

Slow day today so not riding yet 350, but progress was made. Engine installed. MrC says it's a 15 minute job, I disagree but it was easier...

Bout time!

I know it has 4 wheel's but wow! what a machine Introducing my 1986 TRX 250r https://youtu.be/nVd3QgnwAMY

I use snap-on digital torque wrenches. I know snap on is over kill for hobby tools but I need to be able to trust them. Plus I can always bring my...

Took 2nd today on the polaris. It just doesn't have good enough suspension to go fast through the rough woods stuff. But it's fast as hell in the...

Do you (or anyone else) use a torque wrench for anything smaller than 8mm? And is so, what kind, or brand? I’ve never been able to get anything...

I hope you'll be enjoying the ride soon.

Ok guys: here we go again. Persistence pays off Quitters never win, winners never quit. Or maybe I just wanted to give Shad Hoe more reasons...

I have one , send me a pm with your number and I’ll text you pictures tomorrow when I’m in the shop .

Cheap and Easy seat cover install https://youtu.be/KQKTSw5DMB0

6 ft lbs is pretty std for a 6mm case screw .

A Trx250r has a factory regulator . The unregulated lighting systems like a 185s / 200s do not .

My SIL has installed LED headlights on his 86 TRX250R with no problems, both a 8" wide lightbar, and 2 4-LED amber pods (not all at the same time,...

That's where I ended up going with it. I don't have a book but was planning on putting the kick assembly in the right case half and everything else...

I always put the parts in the left Case half , mainly because of the inner kick starter assembly / gears . Not sure if it’s even doable any other...

Properly tuned mods aren't cheap. Hell, toys in general ain't cheap! You get what you pay for.

www.223cycles.net he has what you need. MrC.

First suggestion is only stick with used OEM or bare min Brand name parts. If it's a no name china part on ebay/amazon there's no telling if the...

Thanks for the reply / info. Yeah, I assumed that the timing would be different; that's why I was reluctant to just do a straight swap. I followed...

I am looking into simply replacing the carb completely with a real kehein carb, I’m just not sure if I wanna bite the bullet yet. Price tag is a...

heat, if you don't have a propane torch you can get something at a local hardware store. DO not start banging away on stuff until you use lots of...

Soak it with pb blaster or Kroil. Do this for about 3 days, resolving it periodically. Used a BFH. A heavy dead blow if you don't want to damage the...

There are two sizes of 400ex carbs 35mm and 38mm was used on the later models with the A/F screw plugged with a welch plug for no adjustment due to...

I might as well add my 2-cents... It's a Chinese carb just buy another $40 dollar new one not knowing that any replacement parts u buy may not fit it...