Activity Stream

Hey guys, unfortunately my 85’ 350X with a 400ex carb has developed an issue where it will die after it’s been at WOT for more than 7-8 seconds. By...

Hello all. First off, I posted this in another thread not knowing I could not attach pics. I apologize for my rookie mistake. I am stumped on...

This thing on?! Any OGs on here still?! And why the hell are trikes so exspensive😭 Seen a real nice Grey Honda Big Red modded out for $10, 000...

To start with, where do these o-rings go? There were 2 of them and I apparently missed them on disassembly. They were stuck to the inside of one of...

why cant I find the correct rings for a 1980 185? I have ordered 2 sets now and they are the same and my guess is for a 200. any help would be...

This upgrade is for the non electric start 185 and 200 ATCs with a 12v AC system. It could be used on other models with the same headlight but...

Putting the case halves together. Can't find the torque from the manual other than the list that gives torque specs per size. Does 6-8 ft lbs sound...

Good evening. Been working on a 84 200ES. I have tested the stator, pulse generator, and coil. I even checked all the pins in the plug for CDI box....

Will a 200e run off of a 200s harness or will that ruin the alt/stator. I'm not worried about the electric start just what to get it to start. 85...

Are there any ticks to getting a stuck disc brake hub off? I’ve tried heat, pb blaster, puller tool and nothing. My next idea is to press it off but...

Hey all, I’m restoring an 86 250es and I’m having some issue. I cleaned and rebuilt the carb and put it back together. Fired right up and I took it...

Testing Text Titile

Have my bottom end ready to reassemble. Which side do you normally drop the trans, crank, etc. into before putting the halves together? Sent from...

Hello! I am in dire need of a seat for a 2nd gen 125m I.e. 1986 1987.dont care for the condition as long as the the pan is okay.ill pay good money.

Hello to all Often in the past, technical questions has lead me trolling back to this site over the years so I thought I had better sign up:) ...

I have a big red with what i think is a poor starter. Connections are clean, gears arent binding, battery has full voltage . it engages , but barely...

Hello, I am looking for any information on the Parrot green paint code. I've looked through the forums and I was unable to find a paint code...

Yo life update im now a 2 year certified Ducati tech AMA. also i still have my trike......somewhere lol i have to get that back together. ...

Just got my 250es a few weeks ago and I've noticed a slight problem. It bogs down at full throttle. It also runs pretty hot. From what I've read it's...

I am in need of advice, or a part outlet, for the CDI Module for an 85 Big Red 250ES. Find lots of two plug square, but only round are not for this...

So Everytime I go over loose dirt or any rougher terrain or have to slow down a bit it automatically just starts bogging down and stalls out and I...

Hey all, New guy finally registering and getting some wrenches thrown at my old 200M. I bought it probably 20 years ago with it running but...

What are the differences between the atc110 and atc90 carbs. Mine is a pb 20c. Is there a intake size difference.

Hello! looking for a friend

Hello All, Finally picked up a 1984 Honda ATC 200ES Been watching these forum for years, hoping one day I'd actually own a trike! :) :) ...

Has anyone on here fabed up a working link or long travel rear shock set up on an sx? Thinking about doing one and would love to see some pics

Guys I am finishing up a complete restoration on my 185S I put all new bearings both front and rear along with new brakes sandblasted frame new tires...

Hey guys, I’m rather new to 3WW, and it would be great if someone could explain how to do things like change your profile picture as well as post...

Hello I am having a issue with hi gear and reverse it will go in both but is like it slips in and out when throttling does not pop out of gear but...