Activity Stream

I did similar with some TRX 90s when my kids were small. I put them in second gear, removed the shifter and used the throttle limiter to screw to...

Not at all

I wasn't aware that they had a throttle stop - would it be okay to leave it in 1st gear for a prolonged amount of time?

Just leave it in first gear and use the throttle stop .

Anyone able to vet them? The top one has many listings of different machines and seems to be legit. The bottom one is the seller offering me...

wow this was 14 years ago!! i still have the pictures somewhere too!!!

I did see that but it shouldn’t be a big deal. I’ve been offered a complete exhaust on Facebook but I’m concerned. Seller has the same user name...

You have to cut the 400ex head pipe about where the 350x one ends and weld the end on it there. I show it in my video.

Assuming the spacing etc. all work, here's a cheap brand new option for the head pipe: ...

So, the 400EX head pipe works on the 350X? I thought you had to use the 350X head pipe? (I guess that is the way it was done prior) But the 450...

https://youtu.be/GYPvu0hbghs?si=YK4PTpIM-dCuWui4 Sorry haven’t been on here in a while

WOW! Here is a blast from the past!!!! I was googling something and this popped up.

If you don’t want the width as mentioned above stock 200x hubs , same 4-110 bolt pattern but narrower than the 400ex line up. Sent from my...

Looks like a TRX400 skid plate. Less than $100 on eBay currently...

Well that’s disappointing. I’ve reached out to the seller but not heard anything yet. Price was fair and maybe I can use the chain slider on the...

You should be able to use rear hubs from a Honda TRX250X, 300ex,400ex and/or 450R. This will give slightly more width and a 4 on 110mm bolt pattern.

As far as the decomp function goes, Its not a pin that breaks, it's the casting itself that holds it in place. Just cycle the kick starter slowly...

That’s a helpful guess. I’ll try to cross it with pictures.

I'm pretty sure the skid plate you bought is for a 99-08 TRX400EX.

Well that’s disappointing. I’ve reached out to the seller but not heard anything yet. Price was fair and maybe I can use the chain slider on the...

The picture I uploaded is the OEM skid plate that came off my 1986 350X. I took it off the bike when I got it and put an aftermarket one on because...

8 or 9 inch wheels

Wait-‘so this is the wrong skid plate? 85/86 are different (but interchange)… what is that a picture of? I have to see if bolts line up now.

I’m not sure honestly. The cable was missing so I needed it either way. I know that pin gets broken a lot, and it’ll be coming off, but hasn’t yet.

Maybe the fibers were glazed over then. Regardless, I have replaced the fibers and discs with a tusk kit. I bought a used complete 1 way assembly off...

Does the decomp arm actually move when you cycle the kicker ?. About 50 percent of the ones I've seen are broken . They get broken when people remove...