PDA

View Full Version : Fastest of the fast 300ft times



jadleybray
10-04-2009, 03:08 AM
I am into the 300ft sand/dirt drags. I would like to know what some of you guys fastest times are? Include all the info you can, on the bike, 60ft, mph, type of track and whatever else you can think of. Let's keep this to your trike only, or one you rode in the drags, not your friends brothers sisters boyfriends bike if ya get my drift. Let it begin

So, who's got the fastest trike.

Bryan Raffa
10-04-2009, 06:55 AM
4.86 in 300 here, in dirt... so far:naughty:

Saleenster
10-06-2009, 12:33 AM
4.91 @ Dunefest (sand) this yr, lifted twice on this run. Track was also slightly elevated too....bike was on gas too.

jadleybray
10-06-2009, 03:27 AM
4.86 in 300 here, in dirt... so far:naughty:

Is that on the 490 motor Raf?

Bryan Raffa
10-06-2009, 05:40 AM
Is that on the 490 motor Raf?

yes...and now... Im thinkin it was a 4.78 .. I gotta find the slip..

Saleenster
10-06-2009, 06:10 AM
yes...and now... Im thinkin it was a 4.78 .. I gotta find the slip..

your running billit bowl on the carb so this is on alky. Are you overriden?

Bryan Raffa
10-06-2009, 08:28 PM
:naughty: alky yes overdrive no... Im saveing that for when I turn 40!:beer

FATTYFIVE
10-06-2009, 08:51 PM
4.70 On ALKY in dirt.

jadleybray
10-07-2009, 12:21 AM
4.70 On ALKY in dirt.

Nice Fatty, is there a build on your setup and bike here somewhere?

Saleenster
10-07-2009, 12:51 AM
Nice Fatty, is there a build on your setup and bike here somewhere?

I believe that is a CR500 power plant Jadleybray...

Why dont you post your times on your stock cylinder :acr

jadleybray
10-07-2009, 02:59 AM
Best of a 4.89 on this hunter rig, stock bore, stock stroke 84.

Saleenster
10-07-2009, 09:35 PM
Best of a 4.89 on this hunter rig, stock bore, stock stroke 84.

hey slow pok, how bout this one??

http://img27.imageshack.us/img27/4499/bradsdt.jpg


http://www.youtube.com/watch?v=-JAPTGz65tM


or how bout the Rotax...

http://www.youtube.com/watch?v=yi1JcRykEss

Saleenster
10-07-2009, 09:38 PM
here's a vid of my trike with Pork chop piloting it. That was a 10 mil cub it was racing:beer

http://www.youtube.com/watch?v=Paytux__IcY

Bryan Raffa
10-07-2009, 09:44 PM
vs 4 mil cub

http://i83.photobucket.com/albums/j282/bryanraffa/th_624804203-1.jpg (http://s83.photobucket.com/albums/j282/bryanraffa/?action=view&current=624804203-1.flv)

jadleybray
10-08-2009, 01:32 AM
hey slow pok, how bout this one??

http://img27.imageshack.us/img27/4499/bradsdt.jpg


http://www.youtube.com/watch?v=-JAPTGz65tM


or how bout the Rotax...

http://www.youtube.com/watch?v=yi1JcRykEss


Damn, that dude looks F'in huge!!!

1upfront
10-11-2009, 12:10 AM
5.2 at 61 MPH was the fastest for me on gas with 295cc's, inframe pipe and +2swinger with no wheelie bar lol it's a handful on the launch. Here it sits in west virginia at the track where I ran the time.
http://i39.photobucket.com/albums/e183/lrdunlap/100_0583.jpg

Bryan Raffa
10-20-2009, 10:05 PM
5.2 at 61 MPH was the fastest for me on gas with 295cc's, inframe pipe and +2swinger with no wheelie bar lol it's a handful on the launch. Here it sits in west virginia at the track where I ran the time.
http://i39.photobucket.com/albums/e183/lrdunlap/100_0583.jpg

wet sand... can see it in your paddles :p

KILLER
11-16-2009, 11:37 PM
nice e.t.'s guys , but i ran a 10.4 at trike fest last year on my big red with a full cooler and tunes crankin . :D :beer

Bryan Raffa
11-16-2009, 11:57 PM
nice e.t.'s guys , but i ran a 10.4 at trike fest last year on my big red with a full cooler and tunes crankin . :D :beer

I got his time slip also....;) :lol:


:acr :acr :acr :acr

The Goat
11-17-2009, 02:46 AM
vs 4 mil cub

http://i83.photobucket.com/albums/j282/bryanraffa/th_624804203-1.jpg (http://s83.photobucket.com/albums/j282/bryanraffa/?action=view&current=624804203-1.flv)

you look at this, and you're like...that's blazing fast.

then you watch the vid of the guy who has the world record...and I just can't see how his arms stay in their sockets.

Saleenster
11-17-2009, 05:17 AM
you look at this, and you're like...that's blazing fast.

then you watch the vid of the guy who has the world record...and I just can't see how his arms stay in their sockets.

Fastest single cylinder pass was recorded last wkend at AVI. Matt Shear's 496 Saber went 3.806 on motor, then went 3.708 with N20. That is officially the fastest PSDRA recorded single cylinder pass to date.:acr

Daddio
11-21-2009, 01:32 AM
nice e.t.'s guys , but i ran a 10.4 at trike fest last year on my big red with a full cooler and tunes crankin . :D :beer

I thought you ran a 4.20. :wondering

:D :beer

riverrat
12-31-2009, 03:47 AM
.650 in the 1/8th mile.

Oh wait, that was a slot car..
http://www.youtube.com/watch?v=Q17LodENh1Y

NM, Im just a troll

torker
01-06-2010, 04:06 AM
This one went 5.08 @ 54 MPH on stock bore and stroke, no alky, no nitrous. CR250 ign. syst. 39mm Dellorto carb, 18cc cool head
Stock tranny (no override) 5 ft. wheelie bar. On 300 ft. Sand Drags.

http://img706.imageshack.us/img706/9462/dscf2590w.th.jpg (http://img706.imageshack.us/i/dscf2590w.jpg/)

This pic is from well before it was ready. Not bad for a $0 budget, left overs parts drag trike.
This frame is now beeing finished as my woods racing bike.

TORKER.

jadleybray
02-01-2010, 12:40 AM
hey slow pok, how bout this one??

http://img27.imageshack.us/img27/4499/bradsdt.jpg


http://www.youtube.com/watch?v=-JAPTGz65tM


or how bout the Rotax...

http://www.youtube.com/watch?v=yi1JcRykEss

Alright, the black one is my personal bike, Stock cylinder 313cc, override, alky, wheelie bar the works, ran a 4.53 best so far, 60ft's high 1.6's and mph mid to high 60's.



And......the red one is my builders which I jockey for. Rotax topend, 473cc, all the goodies including alky, override, wheelie bar. Best of 4.12, 1.62 60's with 73-74 mph.

jadleybray
08-23-2010, 02:04 AM
So, anybody been out racing this summer. I just got back fromt he track with my personal bike which is now a ESR 370. Got into the 4.3's with a best of 4.31.

Bryan Raffa
08-28-2010, 10:47 PM
So, anybody been out racing this summer. I just got back fromt he track with my personal bike which is now a ESR 370. Got into the 4.3's with a best of 4.31.

sadly No .. but rebuilding..:D

drag banshee
10-10-2010, 07:12 PM
I have a friend out of southern Ky who has a 330r 4.5 300ft 72 mph 1.30's 60ft override trans

Tecate 50
10-10-2010, 08:16 PM
I observed a Banshee up at Silver Lake Michigan running a wicked 485 cc alky set up......was running mid to low 3.80's at 83 mph with sand paddles. I gotta say that personally is fastest machine I have ever witnessed.....sounded like a bunch of angry bee's......

jadleybray
03-07-2011, 10:35 PM
vid from this last fall at the beach.

http://www.youtube.com/watch?v=ftNmShPgAvs&feature=player_profilepage

brapp
03-20-2011, 01:04 PM
i had a 4.98 in 300 ft, stock stroke .020 some port work pt high rev, 3.8 oz added to flywheel,b 39pwk bored to 42.5mm, custom drag struts, stock swinger, single rad, race cut rear fender, was fast for something i had less then a grand into.

Bryan Raffa
03-20-2011, 04:25 PM
:lol::lol::lol:

jadleybray
07-20-2011, 12:39 AM
Anyone runnin this year? Do I need to even get DT out? JK, but I haven't been out not once. Had to put 2g into the wifes stratus motor, killed by racing fund. :(

Bryan Raffa
08-01-2011, 11:35 PM
I have but no slips ,, just kickin ass...LOL and the occasional RED LIGHT...:rolleyes:

jadleybray
08-09-2011, 02:34 AM
My friend Sean brought his trike to dunefest, and let me jockey for him. Puma powered 250R ran a 4.29 on pure sand. Not too shabby for the track!!!

http://i285.photobucket.com/albums/ll79/gbm68chevy/Dunefest%202011/DSC_0376.jpg
http://i285.photobucket.com/albums/ll79/gbm68chevy/Dunefest%202011/DSC_0377.jpg
http://i285.photobucket.com/albums/ll79/gbm68chevy/Dunefest%202011/DSC_0378.jpg

Bryan Raffa
08-09-2011, 06:58 AM
http://youtu.be/kpHowqLJngM just playin around...that quad is a quadracer motor in a lagers frame 530cc with a KX intake welded on the cylinder..

jadleybray
05-01-2012, 01:33 AM
Well, 2012, who's coming out? DT will back in full force with some minor new mods that should show on the et's. We'll see

jadleybray
08-08-2012, 11:27 AM
Made a bit of an improvement on a loose Dunefest (sand) track, Ran a ton of mid 4.30's with a new pr of 4.350. 60ft were not good, low to mid 1.6's. Looking forward to dirt
152137
Pic from the staging lanes
152138

ATC-Eric
08-08-2012, 11:42 AM
Made a bit of an improvement on a loose Dunefest (sand) track, Ran a ton of mid 4.30's with a new pr of 4.350. 60ft were not good, low to mid 1.6's. Looking forward to dirt.
152135

Pic from the staging lanes
152136


Never get tired of seeing pictures of your R. I finally finished my go fast machine. Have a lot of tweaking to do to everything but the engine (FOR ONCE!) Looking to get a timed pass on the sand by the end of the season here. Cant wait to see what its capable of!

jadleybray
08-08-2012, 12:12 PM
right on. I don't think I've seen your bike. post a pic

ATC-Eric
08-08-2012, 12:43 PM
Dont have any "good" pictures of it yet.

Its a custom Jason Hall cylinder, 6 mil 380 stroker.

http://i109.photobucket.com/albums/n73/ericbs200/484425_10150892388800965_674743267_n.jpg

Equiped with +10 swingarm, I have yet to experience traction with this machine. It spins, and spins, and spins on dirt. Near future plans include purchasing a +6 swinger, and constructing a wheelie bar.


http://i109.photobucket.com/albums/n73/ericbs200/531332_3519153253714_1885695491_n.jpg

jadleybray
08-08-2012, 12:51 PM
If you go to a good groomed dirt track (300ft) your gonna want that +10 swinger, especially if you don't have a wheelie bar.

ATC-Eric
08-08-2012, 01:19 PM
If you go to a good groomed dirt track (300ft) your gonna want that +10 swinger, especially if you don't have a wheelie bar.

Looking to run a wheelie bar setup anyways. Didnt have time before TF to construct one. Didnt need it anyways, never had the front end off the ground in 300ft like it sits.

jadleybray
09-04-2012, 06:22 PM
Any updates?

jadleybray
10-30-2013, 02:58 AM
End of summer, anyone have any fun this year?

ATC-Eric
10-30-2013, 11:44 AM
Unfortunately my job keeps me away from most of the events around here. I've had mine out twice just for some fun on the sand flats.

jadleybray
02-07-2014, 02:55 AM
http://s1139.photobucket.com/user/jadleybray/media/ODR1-4-14_zps4fe3ec13.mp4.html
http://s1139.photobucket.com/user/jadleybray/media/DaLean_zps90c09dbb.mp4.html

David Ham
02-07-2014, 04:30 PM
Don't blink - proof once again that 3 wheels are better than 4! Looks really fun -trike is quick! THANKS FOR SHARING!

ezmoney1979
02-07-2014, 07:03 PM
Thanks for making everything I own look slow.

jadleybray
01-29-2015, 08:03 PM
latest greatest pics

jakep53
01-30-2015, 05:10 AM
Wow thats awesome I have 1 question what gear do you start in? do you just rev it flat out and dump the clutch and to change gears do you just hold it wot and shift with no clutch?

jadleybray
01-30-2015, 07:13 PM
I start in 1st, shift through 4th. Also have an override transmission, meaning modded to be able to shift at full throttle with no rpm drop clutchless. I also use a rev limiter for the launch to control tire spin. Here's the next race I'm headed to at the end of Feb. in Bakersfield Ca.

209390
209389
209388
209391

jakep53
01-31-2015, 05:26 AM
wow ok from reading this thread 4 seconds is a good time shifting once a second thats hella fast!

jadleybray
03-10-2015, 12:50 AM
DeathTrap ran hard at the Bako Sand Drags - lowered my PB to 4.29

https://www.facebook.com/video.php?v=575189475950176&set=vb.100003773873562&type=3&theater

jadleybray
04-04-2015, 12:32 AM
Chassis forsale. Hit me up

yaegerb
04-04-2015, 11:19 AM
Chassis forsale. Hit me up


I saw that you were selling it over on .net. Do you have a new frame you will be riding? I always love to read your drag posts and look through your pics! Hope you aren't getting out of it.

jadleybray
04-09-2015, 01:57 AM
Na, got a new plan, selling to fund it!! Thanks for the props, If you thought I was into this before, you'll like what I've got in mind....stay tuned

jadleybray
08-14-2015, 01:35 PM
Anyone been out running the 300' strip?

jadleybray
12-30-2015, 06:19 PM
Few runs from the past couple years, messing with the iphone video editing.

https://www.youtube.com/watch?v=aRZw3S-b6Xg

jadleybray
03-08-2016, 04:11 PM
Made a pass!!

https://www.youtube.com/watch?v=cBORXM4Rq5U

4.07 Never got to make another pass had some fuel issues I couldn't resolve. But, pretty stoked for off the trailer

yaegerb
03-08-2016, 04:15 PM
Jesus man, you are getting faster. I keep waiting for your next posts :) nice work!

jadleybray
03-08-2016, 05:11 PM
Few pics from Bako
228759 228760
228761 228762

jadleybray
05-09-2016, 01:17 PM
Got a few more passes on DT, made a day trip to Riddle, Or. then last Friday hit up Albany for the first run this year. Got an issue resolved in Riddle, made a few passes A to B, just nipping the 3's at 3.996. Albany went a bit better but was starving for fuel on the big end, 3.95 & 3.97. Definitely more in it!! Couple vids from Albany.

https://www.youtube.com/watch?v=6DOvOWcbDk8

https://www.youtube.com/watch?v=rC13CQjh8jk

https://www.youtube.com/watch?v=G19gJPJQe9g

jadleybray
05-09-2016, 01:31 PM
Few updated pics of DT

yaegerb
05-09-2016, 01:53 PM
Frickin' shweet

jadleybray
05-10-2016, 03:20 PM
Couple more

jadleybray
06-29-2016, 11:02 PM
Saber powa!!!! At it again.

https://youtu.be/JG58ZQeAhUQ

https://www.youtube.com/watch?v=B0MBOGbqX6g

233043233044233045233046233047

nstyle73
07-19-2016, 10:55 PM
I don't think this is thread hi-jacking, but it is also not comparable to the beasts above. Or very useful as they did not provide time slips. I had to run with the sport quads as I was the only trike, 2nd place to a built 700R Raptor. Highlights were beating a Trinity Stage IV Banshee and a Quadzilla head to head in clean races. Track is hard pack limestone that loosened up as the night went along. My own stupidity prevented me from running in the open class.

jadleybray
10-30-2016, 02:34 AM
Its all good, thanks for sharing. Looks like a fair type race? All sorts of venues and setups, all fun to run

fabiodriven
12-12-2016, 08:52 PM
Excellent thread! I'd missed it until today somehow. I don't have any official times, I've only ever run at Trikefest and I don't think we have official times there, just winners and the winning disabled. In 2013? I think, we ran an 85 Tecate with an 86 KX500 engine. Friggin thing hauled the mail! We were learning so there was a lot we could have done to make it faster, dropping the suspension for starters. These bikes are unrefined upon our arrival to Haspin though, as we have very few places here in Massachusetts for testing and tuning.

http://uploads.tapatalk-cdn.com/20161213/c0ec2c483352a8d6c068a5d446178880.jpg

http://uploads.tapatalk-cdn.com/20161213/ae9d8011671e78c77a43da1e03a55c76.jpg

http://uploads.tapatalk-cdn.com/20161213/db8faa2d253d88bf34c81daea77fac75.jpg

This past Trikefest we put together an 84 ATC250R with an 82 CR480 engine. It had slightly less balls than the Tecate, but not much. Still a complete animal. I prefer the half liter bikes over the Pumas and such, just my own personal preference. I'm extremely happy with both of these builds and would like to run them more in the future if I can find some drags near me.

http://uploads.tapatalk-cdn.com/20161213/ec988ca7d96ae682ac5f794d06e96004.jpg

http://uploads.tapatalk-cdn.com/20161213/59f65fae032ca8acbdf9b56138b53d9e.jpg

jadleybray
02-15-2017, 05:35 PM
Well fellas, the end of an era is upon us. I sold the DeathTrap chassis to a guy in Virginia. If you follow Facebook probably already know. So with an end, comes a new beginning. ;)239845

yaegerb
02-15-2017, 07:29 PM
Well fellas, the end of an era is upon us. I sold the DeathTrap chassis to a guy in Virginia. If you follow Facebook probably already know. So with an end, comes a new beginning. ;)239845


what are we thinking about now?? Don't leave us hanging!

jadleybray
02-15-2017, 09:05 PM
I have an old suspended chassis I'm going to resurrect, plus I picked up another 82 airfooler to tinker with.

All said and done, honestly didn't get what I wanted out of DT this past year. After just dipping into the 3.90's with a .99 first time out, I was confident I would hit the 3.80's by year end. As it may, I fought fuel issues for quite some time and just didn't get it all tuned as well as should be. Finished out with a 3.94, bunch of 3.95-3.96's.

jadleybray
01-12-2020, 05:52 PM
It’s been a minute since being here at 3ww. Anyone out there drag racing?

atc300r
01-13-2020, 12:18 PM
I ran a couple drags lastyear.I race my 300r and 85 liquid r.I got a first and second in two separate classes in August race.Sept race I got a second,third and fourth. I raced a Banshee for a guy that had signed up two quads in the same class.It was just a piped banshee I got 5th with that aswell my first time on a Banshee .

jadleybray
05-09-2021, 11:57 AM
Nice work, it’s addicting

ZackJones1
06-14-2021, 05:40 AM
Nice work, it’s addicting

I agree, I can immediately see the very hard work and love the author has for his work!

jadleybray
09-21-2021, 10:01 PM
Welp, being I started this thread in 2009, figured I drop a comment for 2021. How’s the racing going out there? Drop a pick stat!

atc300r
09-22-2021, 09:24 AM
I just got back into drag racing .I didn't get any time slips from the first 2 drags.I will get some on October 2and when we have our final drags for this year.