87 Warrior Carb Problem, Help!!!

[mkramm]

On the 87 warrior carb there are two brass nipples, one on left & right side of the top of the carb. Right now they are not connected to anything, but that just doesnt seem right to me. If you know where they are to connect too please contact me and let me know. I cant figure if they connect together or to two different spots.

Any help would be welcome

Thanks

mark

[86250r]

they are vents they should have a 2 inch rubber vent tube going straghet up under the gas tanke they do not hook to any thing.
i have an 88 and they have the same carb.

[mkramm]

thank you thank you thank you...........thank you

I was worried :)

I have another question, If I pull off the carb and take off the bowl, will I have to get another gasket for it?

[86250r]

No the gasket is supos to be reusable but be vary careful when taking the bowl off. and plus i think it is an o-ring its been a while since i hade mine off.


i have a question for you do you have any extra parts?

[mkramm]

I was gonna ask you the same thing. I will have an extra gas tank & gas cap, and a couple screws, but thats about it. I am still missing a vital part, the pull starter :(

[86250r]

sorry there,i hade to buy a new one from the dealer around here.good luck.

[mkramm]

Hey your rims are here

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43972&item=2428551828