View Full Version : 84 200es big red fork swap
HONDA_ATC_FREAK
04-06-2010, 11:55 AM
Ok had this on the main forum haven't got any hits, so I thought I'd post it here. I figure if it can be done this should be the place for it. I'm tired of my crappy suspension, what forks can I swap out. I've heard of the 200m and 200s forks will be a direct bolt on. Are they hydrolic forks? Can I use my hub, axle, tire, and fender or will I need different ones. What else am I missing here?
HONDA_ATC_FREAK
04-07-2010, 02:16 PM
Ok so I've figured out the 200s uses a 8" rim and the 200m uses the same size as my 200es so will my 200es hub assembly and axle work, or do I need a whole 200m front end.
I used the whole front end off an 85 200M. works great...
HONDA_ATC_FREAK
04-08-2010, 09:43 AM
Theres one on ebay but it doesn't have the clamps and it's bent but It's only 25.00.
HONDA_ATC_FREAK
04-08-2010, 05:13 PM
Ok decided on going with a 200m front end does anyone know if my rim and hub assembly will fit on the 200m front end.?
whittim
05-07-2010, 09:28 PM
i just recently modified a set of 250 big red forks to fit my 200es big red
HONDA_ATC_FREAK
06-12-2010, 02:08 PM
Finally scored a set of 200m forks and hubs so I can start on my front end swap.:w00t:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.