PDA

View Full Version : Tf swap meet???



big specht
05-25-2010, 08:15 AM
Lets get a thread started post up what you want to sell there and what you are looking for.

jeswinehart
05-25-2010, 11:02 AM
Really only wanting to BARTER, not so much to sell,,, my reproduction Tecate parts (intakes, sliders, flywheels) for tectae parts.
Going to be looking for handle bars, handle bar left side eletrical controls, perhaps a full wire loom and head light assembly to name a few parts.
Other things that may be of interest: 25Or / 250 TriZ tach, one set of rear tires and a few other items that I am not sure what thet will be yet.
Basically only looking for Tecate stuff and to barter since it is alot more fun then just money IMO.

john

Tecate 50
05-25-2010, 12:51 PM
Bringing 1986 Tecate parts: Frame, swingarm, front rim with Front Max tire, axle (re-plated), hubs, forks, 2 front fenders and some mics. parts!

big specht
05-25-2010, 02:58 PM
john what years Tecate

jeswinehart
05-25-2010, 03:28 PM
Parts I would be looking for are the 84/85 T-3. Parts I have to offer up are 84 thru 87 T-3.
yeah, I should have put that in type the first time. Thanks

nitrodude81r
05-25-2010, 04:18 PM
If anyones interested I will bring some 200x parts (axle, swingarm, sprocket and brake hubs) and whatever else I can find.

big specht
05-26-2010, 04:36 PM
I'm looking for some blue 225 tank sheilds

ATC-Eric
05-26-2010, 06:07 PM
Mr. John, I am interested in a Tri-Z tach possibly........

jeswinehart
05-31-2010, 06:13 AM
My "want list" for my 85 Tecate project is pretty much complete and is as follows.
Complete air box assembly
Complete head light assembly
Engine gasket kit (can mix and match from other guys left over kits if we can get organized on that ?)
Complete left handle bar electrical controls assembly (on/off-light switch)
1 header exhaust spring
Handle bars
2 stock air box/intake boot hose clamps
Rear axle
Primary sprocket chain guard cover (bolts on the motor)
Rear brake master cylinder (don't need hoses or banjo bolt)
Coffee can of stock metric nuts/bolts/washers from a T-3 part out or just left overs.
I will get pics of what I have to barter with later on in the day and post up separately.

Thanks guys ! john

jeswinehart
05-31-2010, 10:07 AM
Stuff I will have @ TF2010 with possible exception of the green front fender and or the 38mm carb.
*** fender is for cattle dog to either use on his T-3 or to barter with for the RED rear fenders he is wanting ***
*** carb also might go to cattle dog if he can use ***
*** ALL Tecate stuff with exception to the tachs (R and Z) ***
Any questions, comments or what ever will NOT be answered here to keep the postings (at least related to my stuff) only to NEED and HAVE stuff able to go to TF2010.
You are welcome to PM me.
Great idea big specht !

Thanks folks, john

3Razors
05-31-2010, 12:50 PM
Who has the email for that guy in Germany that makes repro tecate stuff? He called me about a Tecate rear fender brace that I would like to pick up at trikefest, but I don't have contact info to him.

big specht
06-01-2010, 04:32 PM
This is all that is going to be there for sale ?????:crazy: I figured there would be more , I just need to know so I can leave extra space in the trailer:)

jensenracing77
06-01-2010, 08:08 PM
i think i am going to bring my 350X to sell. it is a pile but it runs:D
i also have 73 and 74 ATC 70 parts that i am thinking about bringing. i will also try to sell my fast ATC70 also. i will want $800 for my 70. i have a local guy wanting it but he has not brought any money. if there is anything you need for a 73 or 74 atc 70 let me know and i will be sure to bring it, frames, forks, back covers..... i do not have any exhaust, recoils, back bars or skid plates.

ATC-Eric
06-02-2010, 10:51 AM
How much will you want for the 350x? If the price is right, I will take it off your hands.

Itrike
06-02-2010, 11:19 PM
Stuff to trade /sell
Triz 85 parts
front fender, head light , tail light , engine casses , shrouds , foot pegs
250r parts
83/84 seat , 85 running engine (I might part out the hole trike)
Will have a few sets of wheels (honda)
Might sell 87 200x ,and my 86 200s

things I need
85 250r frame , swing arm bolt for 85 250r
A good 350x frame , running engine for 350x

tapper190
06-03-2010, 05:57 AM
I'll have some fender braces (fits 200x, 350x and 250r) and swingarm skid plates ( fits 350x) to sell or trade, let me know who's interested and I'll make sure that I'll have one for you.
I'm looking for the 350x brake set-up, rear grab bar and rear tail light
Thanks....Tapper

jensenracing77
06-03-2010, 06:29 PM
to tell you the truth i don't know yet.

big specht
06-07-2010, 08:18 AM
I'm looking for 84 and up 110(square air box) rear finders and some mud flaps for the same style finders

sandpuppi101
06-07-2010, 12:08 PM
Stuff to trade /sell
Triz 85 parts
front fender, head light , tail light , engine casses , shrouds , foot pegs
250r parts
83/84 seat , 85 running engine (I might part out the hole trike)
Will have a few sets of wheels (honda)
Might sell 87 200x ,and my 86 200s

things I need
85 250r frame , swing arm bolt for 85 250r
A good 350x frame , running engine for 350x



Kurt I think we can prolly do some business again down there,let's get ahold of eachother.As far as a need's list I could use a few '83-'84 R part's and Jensen I'm looking for the bottom chain/egine cover for the '73 ATC KO 70 if ya got one.If I have interest I'll take a Blue 110 and a Yamaha 225DX that I'd like to sell.I'm sure i'll think of alot more want's to buy's and need's to sell items.Does anybody have any decompression cable's for 350X's.I'd be interested in a few of them.

Gag_Halfront
06-09-2010, 01:30 PM
I'll have a ton of Tecate parts, some 125M parts, a complete 110 motor (Billy G has dibs if he wants it) and a disassembled 185S motor. Maybe others. We'll see.

I'll also have my beater little 70 for sale if anybody wants it.

big specht
06-09-2010, 03:29 PM
Rear finders????

Gag_Halfront
06-09-2010, 04:20 PM
I have a single set of spare 125M fenders but I won't be bringing them to sell. I can't really part with them until my daughter quits crashing her trike. :-/

I may have a spare set of tecate fenders in usable shape.

big specht
06-14-2010, 08:25 AM
MY brother is looking for a good rear master cylinder for a 350x

fla 2-stroke
06-14-2010, 09:44 AM
I am going to be looking for a atc70 and a ytm225.I will have cash and be there on sunday.

sandpuppi101
06-14-2010, 09:51 AM
I am going to be looking for a atc70 and a ytm225.I will have cash and be there on sunday.

I'm gonna be bringing my 225DX and I'll take cash no problem and Gag I may be interested in these Tecate fender's you speak of..

big specht
06-14-2010, 11:25 AM
I have some non trike parts I would like to sell I have a set of mickeytompson classic II's for a 8 lug superduty they are 16.5x 12 in good shape just need polished 250 for all 4 can send pics

And I have some ford 6.0 diesel 03/04 and 05/07 egr coolers and valves 250 o.b.o on the coolers and 100 on the ford egr valves

kiser
06-16-2010, 05:38 PM
I have a 1983 honda 110 beater for sale. It runs pretty good and has good tires but its ugly. I also have a 200x gas tank, twist throttle with cable and a DG muffler (no head pipe). I would like to sell or trade any of these items for 70 or 350x stuff. Tapper190 i would be interested in that 350x swing arm skidplate.

tapper190
06-16-2010, 06:29 PM
I have a 1983 honda 110 beater for sale. It runs pretty good and has good tires but its ugly. I also have a 200x gas tank, twist throttle with cable and a DG muffler (no head pipe). I would like to sell or trade any of these items for 70 or 350x stuff. Tapper190 i would be interested in that 350x swing arm skidplate.

Not a problem, I will be there sometime on Wensday and be leaving sometime on Sunday, look for the ontario plates, ;) I'll be riding a 350x or a 250sx
Tapper

zagames
06-16-2010, 06:34 PM
I'm looking for the 82-83 black Kawasaki KLT 200's. Preferably model A2 through A4. Let me know before next Wed so I can get some cash if needed.

Gag_Halfront
06-17-2010, 03:14 PM
MUAHAHAHAHAHAHAHAHAHAHA

Yeah. Sure, Zach. We'll set aside a whole section of the swap meet for all the KLTs that people will have there. :-D

:beer

atctim
06-17-2010, 03:41 PM
I need 85 or 86 250R forks and triples - if anyone has some - please bring them.

ATC-Eric
06-17-2010, 04:28 PM
I need an 86 rear brake caliper bracket like nobody's business!

jensenracing77
06-17-2010, 05:29 PM
i have a set of 86 200X front forks and triples. should i bring them? how much do i put on them?

Derrick Adams
06-19-2010, 07:33 PM
I sure would like a nice set of 225DX fenders in yellow. Maybe i'll get lucky!

Bryan Raffa
06-19-2010, 10:36 PM
I got a set of TRX nerfs NICE!!!!!!!!! PM me! and a BW ROLLER!

I need two sets of lower rear fender mount's for a tri Z..

Bryan Raffa
06-19-2010, 10:37 PM
I need an 86 rear brake caliper bracket like nobody's business!

for what?....

Gag_Halfront
06-20-2010, 01:52 AM
IIRC, Eric needs the bracket for an '86 250R

u.p ted
06-20-2010, 11:52 AM
im looking 4 some 1 that has a honda 110atc 83 to 85 seat,

MIK6
06-20-2010, 02:26 PM
I just found out my 70 motor is JUNK!! im looking for a 70 @ trikefest!!!
Also need a headlight bulb for a blaster, it fits me Polaris scrambler 3.

MIK6 / Mike

atctim
06-21-2010, 08:39 AM
anyone have a good stator for a 1983 ATC185s? I am in dire need of one.

sandpuppi101
06-21-2010, 09:24 AM
I'm bringing down a 'nice '83 Yamaha 225DX for sale ,ready too go and a ton of other part's so make sure you check out my part's selection .I'll try to pack as much as I can with me..Call me at 810-614-1902 before Tuesday noon if ya need anything specific,I won't be online until tomorrow morning again.

big specht
06-21-2010, 01:12 PM
you need the ignition part or the lighting part

atctim
06-21-2010, 02:11 PM
you need the ignition part or the lighting part

I'd like both if you have them - I am not sure which one is bad - but I am getting too much juice and it is eating CDIs like crazy - headlight is super bright too - might just be the lighting side - but I would hate to burn up another CDI not being sure - already ate thru 3. I'll gladly pay what you are asking for them both.

I'll be in the OTC camp (White Dodge Conversion Van) - where you camping????

jensenracing77
06-21-2010, 05:15 PM
anyone have a good stator for a 1983 ATC185s? I am in dire need of one.

i will look and see. i may have one. if i do, you can have it. i will try to check tonight. i have the engine but can't remember if it has the stator still

ctk
06-21-2010, 05:43 PM
I need the left side( side with gear shifter) lower fork for a 1983 200e. This has a suspension front end. Pm me if you got one please.

i have a complete front end off a 185 to trade

jensenracing77
06-21-2010, 07:59 PM
i will look and see. i may have one. if i do, you can have it. i will try to check tonight. i have the engine but can't remember if it has the stator still

sorry tim. i have what i think is one for a 185 but i don't think it is any good. i will bring it anyway. if you can use it you can have it.

tapper190
06-22-2010, 05:44 AM
anyone have a good stator for a 1983 ATC185s? I am in dire need of one.

I think I have one, If I do I'll bring it along with me
Tapper