"NEW" 200x

[aldochina]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190400961439&viewitem=&sspagename=STRK%3AMEWAX%3AIT#v4-34
dont know about museum qual, but it is nice!

[puggerton03]

So in the ad he says the rear sprocket costs $2280. I call BS.

[greenhuman]

Would look a LOT better without all the stickers.

[TDS]

i dare someone to ask him if he will part it out lol

[HONDA_ATC_FREAK]

The rear sprocket is worth more than the 200x:shiftyeyes::banned: some one should ask how much he'd want with out the rear sprocket.:D.

[code200k]

ya know i saw this the other day on egay,yes it looks good but some stuff dont look right ex #1 being the sprocket..

[old honda dealr]

I may be wrong but I think if he was racing back then he would be using duro tires or H-tracs not itp holeshots or maxxis razors whatever they are. And That axle looks brand new. Does not look like 26 years worth of age on it.

[mopar_man]

And That axle looks brand new. Does not look like 26 years worth of age on it.

The machine supposedly only has 12 hours on it.

It looks like a nice machine. I think if he took the time to remove all the stickers, he might get a good price.

[puggerton03]

I emailed him about the sprocket and he says he paid that much for it because he wanted Stainless. I still dont know how somebody could pay that much for a sprocket, that price has got to be right around the price of the 200x off the showroom floor!

[rdlsz24]

Nice 200x but it looks like a billboard

Rob

[fabiodriven]

So in the ad he says the rear sprocket costs $2280. I call BS.

Maybe he meant $22.80. :D

[blue27]

no way anyone would pay 2000 for a sprocket, the decals are correct for the age but ITP XCRs were not around back when you could race a 200x, PRm did not make skid plates back then either as far as I can remember, and if you run an exteded Durablue with spacer, #1 you are gonna bend it, and # 2 it will be to wide for compition, because it should be wider then 51". Its nice but Honda would not want it either. Good luck with the auction.

[Thorpe]

Did they make K&N filters when I was 5? (1985)

[three_wheelin45]

LOL I love this kinda stuff...I mean come on 2280$ sproket lol... That add is pricless

[Eric250R]

no way anyone would pay 2000 for a sprocket, the decals are correct for the age but ITP XCRs were not around back when you could race a 200x, PRm did not make skid plates back then either as far as I can remember, and if you run an exteded Durablue with spacer, #1 you are gonna bend it, and # 2 it will be to wide for compition, because it should be wider then 51". Its nice but Honda would not want it either. Good luck with the auction.
Glad you caught this too.....holeshots were not around until about 87 or 88. PRM I"m not sure about....

[Eric250R]

Did they make K&N filters when I was 5? (1985)

Yes they did.....

[Xfile]

Not the best ATC I have ever laid eyes on.....

[Billy Golightly]

Thats a cool bike and it has some nice aftermarket stuff on it (that rear caliper/disc plastic guard from Maier is kinda rare) but not sure if its museum quality...

[Grizzlypeg]

Looks like the gas tank still has 1984 gas in it and there are what appear to be rust spots inside the tank. 19 hours to machine the rear sprocket, what a laugh!

[seadoo650]

Hahahahahahaha. That is some funny reading. I read through the whole ad and then looked at the pics expecting to "see" something really cool. WOW..........was I dissapointed. I could turn out something like that in a few days. And what's the deal with the "stainless" sprocket? I don't recall any writings about a stainless sprocket that the racers used. I do have a solid aluminum one that was used but I believe they wore out quickly and were surpassed by regular carbon steel. (I may be wrong on this) Damn, If I ever sell the RacerX, and based on this ad, I could get $10,000 for it. That is if I don't ship it to the museum in Japan. HA!

[portland250r]

he must be high on something to say the rear sprocket is over 2000$

[Xfile]

A friend of mine owns a water-jet cutting shop....he told me he could cut that sprocket out of stainless steel in less than an hour...

[RodKnockRacing]

looks to me like he trying to snow bidders

[jonathanchevy]

There is no way that sprocket cost that much iv been running a wire edm for years and iv made them in like 2 hours and at todays prices it would cost around 250.00 if you were charged full price and if i would have made it i would have used a cnc mill but for 2000.00 i well make them all day.

[xrider]

You can actually still buy the rear caliper/disc guard from maier, just received one a few days ago actually.

[Billy Golightly]

You can actually still buy the rear caliper/disc guard from maier, just received one a few days ago actually.

Can you??? Learn something new everyday :)