200 atc oiling

[moonerdizzle]

Well folks, im looking to pair up a honda 200 atc motor i have with a garrett GT1750 turbo i have laying around, and im wondering if there is any way to tap into the motors oiling to oil the turbo. Any info would be appreciated, i have no idea if it is possible, or the psi that the oil is under. This is my first experience with hondas and 4 strokes in general, always been a 2 stroke guy, but oh well. Always good to try some thing new.

[HaggLE]

This should help
http://www.teammaddogracing.com/phpbb/viewtopic.php?f=6&t=748&p=17963

[HaggLE]

I will mention however, these engines do not produce enough exhaust pressure to turn even the smallest turbos, let alone a GT1750

[moonerdizzle]

I will mention however, these engines do not produce enough exhaust pressure to turn even the smallest turbos, let alone a GT1750

i beg to differ, i know for a fact that a 5 horse briggs motor can spool up a turbo to positive pressures, like i said, it was laggy as all get out, but it does happen. and a 5 horse is slightly lower displacement, and has alot more restrictive flow, so there should be no reason the this motor couldnt spool up a gt1752. its crossflow, and OHV. wich helps it breath and flow alot better than a 5 horse flat head.