Dies for tight spots?

[twitch101]

Does anybody make a die that is the size of a nut? I need to fix some threads in a really tight spot that nothing can get to but a nut. Its an m8x1.25. My die is a whole inch and thats way to big.

[300rman]

Never seen anything. you may be able to grind the die down, i knwo the outsides of a die are all made the same size regardless of the thread so they all fit into the same die handle.

[twitch101]

http://www.autozone.com/autozone/accessories/OEM-Thread-Restorer-Set/_/N-264e?counter=0&itemIdentifier=391372_0_0_

Has to be somthing. There in this set but dont have 8x1.25

[Scootertrash]

Sears has this one that has an 8X1.25 die:
http://www.sears.com/shc/s/p_10153_12605_00952105000P?prdNo=2&blockNo=2&blockType=G2

I bit the bullet and bought a set a few years ago. It has come in handy more than I ever thought it would

[sblt500r]

Never seen anything. you may be able to grind the die down, i knwo the outsides of a die are all made the same size regardless of the thread so they all fit into the same die handle.

there is different od size dies and handles. theres 13/16", 1", 1 1/2, 2", 2 1/2", 3" and probably bigger. theres also hex dies.

best thing you could so is get a hex die and use a socket to run it down the threads.

http://cgi.ebay.com/M8-X-1-25-CARBON-STEEL-HEXAGONAL-DIE-/300508876283?pt=LH_DefaultDomain_0&hash=item45f7b98dfb

[Scootertrash]

The set I posted above sblt's post are indeed hex dies, but they are designed to repair a damaged thread, not cutting a new one, although I have used a regular die for repairing a damaged thread. sblt's link would be much cheaper route to go. I bought the set because I do enough wrenching where a full set came in handy.

[twitch101]

i ended up pulling theader and clean all the threads on my 350x. just wish they made dies the size of a nut

[honda250sx]

They make chasing nuts that are just that, the size of a nut. You can get a whole set at sears and likely harbor freight

http://cgi.ebay.com/METRIC-THREAD-CHASER-RETHREADING-DIE-SET-M6-M12-USA-/140561747350?pt=LH_DefaultDomain_0&hash=item20ba220d96

[twitch101]

i didnt know what they were called lol thanks

[Scootertrash]

They make chasing nuts that are just that, the size of a nut. You can get a whole set at sears and likely harbor freight

http://cgi.ebay.com/METRIC-THREAD-CHASER-RETHREADING-DIE-SET-M6-M12-USA-/140561747350?pt=LH_DefaultDomain_0&hash=item20ba220d96


Same thing I had in my post, but the link was bad. Link has been fixed, but here it is again (sears rethreading kit):
http://www.sears.com/shc/s/p_10153_12605_00952105000P?prdNo=2&blockNo=2&blockType=G2