Crash104936221
10-28-2003, 11:20 PM
im thinking of useing a stock banshee axle setup for a project mainly due to the way it mounts..
but i need some mesurements i cant seem to find from the axle
its width (when mounted) from the outside of the hubs
the distance between the outer mounting flanges of the carrier, and the flange thickness
distance from the outside of the mounting flange to the inside of the sprocket
the distance from the right hub to the ouside of the mounting flange (looking from the rear)
Thanks your help is vastly appreciated
Joe
but i need some mesurements i cant seem to find from the axle
its width (when mounted) from the outside of the hubs
the distance between the outer mounting flanges of the carrier, and the flange thickness
distance from the outside of the mounting flange to the inside of the sprocket
the distance from the right hub to the ouside of the mounting flange (looking from the rear)
Thanks your help is vastly appreciated
Joe