PDA

View Full Version : hello from newport news VA



myfastlx
10-30-2011, 07:46 AM
Hey everybody in 3WW. Names Eddie. I was just given for free a Yamaha three wheeler and know very little about it. I plan on using this forum to help me revive this back to glory days once again. The only thing I was told was that it ran fine 2 years ago and was parked and covered. Unfortunately it was camouflage painted. But this bike should clean up well. I was also told this is a 350cc bike. But my assumption is that its only a 250cc. After I run the VIN we'll know alot more.

Swinger
10-30-2011, 07:51 AM
Got any pics, we can probably tell you what it is w/o running numbers!

myfastlx
10-30-2011, 09:02 AM
Just got off the stem 24W-115659...pics coming. Uploading them is not DROID friendly.

HuffieVA
10-30-2011, 09:49 AM
I believe 24W is a 200, I'm pretty close and currenty have five 200's a couple are parts bikes and one is borderline. once you figure out what you need let me know and I'll see if I can help you out...

Rodd

myfastlx
10-30-2011, 09:51 AM
134380134381134382134383

myfastlx
10-30-2011, 09:54 AM
Thanks Rodd. From what I can tell so far, the throttle linkage is pretty toast. It will function but is very rough. I have to manually pull the throttle back. I don't know if this is a spring or bad lining issue. Either way, I'm sure the easiest method is to just replace the entire throttle cable assembly. I'll keep you posted. Thanks again.

MonroeMike
10-30-2011, 12:41 PM
Welcome to the site.

That's a 84 YTM200e "Yamahauler"
http://72.52.143.80/~trikes/ytm200&225-fm200_clymer_manual.pdf

myfastlx
10-30-2011, 06:53 PM
Monroemike, thanks alot! I appreciate your help dude.

LastFoolerInVA
11-07-2011, 12:26 PM
Dude, thats a sweet bike!!!