Honda 200x atc problem

[Dogsoldier]

Its running decent.I still have to turn the idle screw in alot to make it idle but its definitely idling too high.What causes it to back fire?

[shortline10]

Your idle jet is part clogged .

[hoosierlogger]

A lean condition will cause backfiring on deceleration. Like Shortline10 said, clean your idle jet. Use compressed air do not poke wire in there or use a drill bit. you will woller it out and cause it to be rich.

[Dogsoldier]

Ok I'll try that and see what happens.Also on cleaning the fuel filter when I unscrewed the nut on the bottom of the tank all that came out was a rubber tube attached but don't I need to clean the screen thats in the tank too?And whats the best way to get it out?Thanks for all your advice.

[Dogsoldier]

And cleaning the jet out worked!Thanks alot.