PDA

View Full Version : Honda 200x atc problem



Dogsoldier
10-30-2011, 05:07 PM
Its running decent.I still have to turn the idle screw in alot to make it idle but its definitely idling too high.What causes it to back fire?

shortline10
10-30-2011, 05:10 PM
Your idle jet is part clogged .

hoosierlogger
10-30-2011, 05:25 PM
A lean condition will cause backfiring on deceleration. Like Shortline10 said, clean your idle jet. Use compressed air do not poke wire in there or use a drill bit. you will woller it out and cause it to be rich.

Dogsoldier
10-30-2011, 10:50 PM
Ok I'll try that and see what happens.Also on cleaning the fuel filter when I unscrewed the nut on the bottom of the tank all that came out was a rubber tube attached but don't I need to clean the screen thats in the tank too?And whats the best way to get it out?Thanks for all your advice.

Dogsoldier
10-31-2011, 07:31 PM
And cleaning the jet out worked!Thanks alot.