Need more power

[bcredneck]

i was just thinking about tac welding a motor mount back on my mini quad then i remebered some dick went flying
past me on a 200m laughing last time i rode it all that work for 40 clicks an hour is not going to happen again
this time i got a welder a big motor and im going to be the dick flying past someone laughing
i will be useing a 74 yz 250 motor with a +2mm carb it was a great bike but im board
http://www.3wheelerworld.com/attachment.php?attachmentid=122040&d=1302930117

[bcredneck]

just incase any one thought i was kidding
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/320641_2610793872059_1321358857_2999597_1085133807 _n.jpg

[hoosierlogger]

Heck yeah! now people are going to say "WOW!! Did you see how fast that guy was going on that little girls pink 4 wheeler?"

[bcredneck]

damb right

[bcredneck]

i forgot to mention this will mostly be used for ice

[bcredneck]

and it was red

[hillbilly 200x]

this should be really sweet when its done!!! lol

[KASEY]

HELL THAT REAR SPROCKET IS AS BIG AS THE TIRE!!! no wonder it won't go fast.............................

[SYKO]

just incase any one thought i was kidding
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/320641_2610793872059_1321358857_2999597_1085133807 _n.jpg


its a good chance the motor in the atv now makes just as much power as this relic does...........gl with that.

[bcredneck]

that bike went prety fast with alot of weight and i already bolted a smaller sprocket on the quad right after i built it

[bcredneck]

well it fits
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319263_2621287494393_1321358857_3004835_894430839_ n.jpg

[whyzee]

This is just going to be so much fun to watch this build

[ezmoney1979]

Do I spot bed frame motor mounts again? What the hell do you sleep on?

[briano]

I see you graduated from bed frames and are now onto garage door hardware for your builds

[just ben]

you do make it pretty easy to pick on your builds but I do give you credit for trying. P.S I hope your old man isn't too pissed his garage door does'nt work any more

[RubberSalt]

Build a custom pipe and port it!! or just a custom pipe, I can have everything you need, number wise!!


Pipes are not hard to build, specially without an arc welder.. lol

[badass350x]

you do make it pretty easy to pick on your builds but I do give you credit for trying. P.S I hope your old man isn't too pissed his garage door does'nt work any more

TOOOOOO funny!

[Jason125m]

Oh my.....

[bcredneck]

you do make it pretty easy to pick on your builds but I do give you credit for trying. P.S I hope your old man isn't too pissed his garage door does'nt work any more

how the h*!! did you know i took parts from a garage door and the quad runs and looks alot better i finished last night and rode it home i had to shorten the pipe 8 inches and i got damb lucky there seems to be less bottom end but mid range hits harder and it winds right out but i had the motor apart and cleand alot of crap out so that could be where im getting a better runing motor
im going to hold off on any porting if i have anymore power i dont think it will be controlable i alredy have problems ridding off ice or snow to dirt it likes to flipp back
ill have pics soon

[thestud25]

Screw the pics, lets see a video of you riding that pink taco tornado!!!

[atctim]

and it winds right out but i had the motor apart and cleand alot of crap out so that could be where im getting a better runing motor


Can you give me specific information on "cleaning crap out of motors"? I have some 3 wheelers I would like to run better, and now I fear the motors must be full of crap. How do I go about doing this?

[bcredneck]

the bike sat for along time in long grass the reeds ports and crank were covered in crap and i cleaned the crap out and scraped the thick carbon build up out of the exaught port simple as that
heres the pics
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391316_2631465628840_1321358857_3009448_775178133_ n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/386039_2631466788869_1321358857_3009450_1141396628 _n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391984_2631466308857_1321358857_3009449_1975376418 _n.jpg

[hillbilly 200x]

wow man I am really loving the sprocket!!!! if I send you the engine out of my skidoo TNT do you want to put that in a trike for me? Really loving your work man lol

[bcredneck]

welding that sprocket on there saved me hours of work and was a nightmare to get centered it was that or make a new swing arm and rear end

[thestud25]

Did you weld it to the output shaft, or just the other sprocket?

[bcredneck]

i welded it to the other sprocket i wanted to be able to grind it off if i have to split the case or i put the motor in something else later

[thestud25]

i welded it to the other sprocket i wanted to be able to grind it off if i have to split the case or i put the motor in something else later

Well at least that was good thinking. I want to see a video of this thing!

[bcredneck]

ya ill be making one today im waiting for my boss to get home to hold a camera

[CRAZY70MAN]

ya ill be making one today im waiting for my boss to get home to hold a camera

Good lord your boss must be a brave man!! lol Tell him to stay back at a safe distance......you don't want to kill or mame him and lose your job!! And that looks like a good possibility from what I see in those pictures!!:lol::lol: Just kiddin man....you have at it.....you got some great creativity at times.....a bit dangerous but that is the thrilling part of your builds...... Remember like I say......."Anyone can do it with the right sh$%!! Do it with the wrong sh$# once...:lol:

[bcredneck]

unfourtatly this thing runs on gas and i ran out so you will have to wait for a vid

[SYKO]

pink taco tornado!!!



thats all I needed! :lol::lol::lol::lol:

[lazybiker79]

I can't wait !!!! :)

[HuffieVA]

its a good chance the motor in the atv now makes just as much power as this relic does...........gl with that.

As much as I hate to I have to agree with ya, I had a nice clean 75 DT400 and I could hardly get the front wheel off the ground... and yes it did have street gearing but it felt like it was ready to self destruct at 65 on the highway...

[Chazz of Blades]

Just weld on a few cans of beans to the exhaust. Then you'll have all the gas you need.

[bcredneck]

As much as I hate to I have to agree with ya, I had a nice clean 75 DT400 and I could hardly get the front wheel off the ground... and yes it did have street gearing but it felt like it was ready to self destruct at 65 on the highway...

you most likely have a dt-1 5 port cylinder normaly found on endro bikes it has no reeds this motor was a dt-1 but i had this yz top end and pistion for it its a dt-2 7 port with reeds so the motor is pretty much a yz 250 with street gears and has more power than a chinenes 125 could ever make

[HuffieVA]

They had reed valves on the 400's in 75, and yes you will have more power... at least until the vibrations from your... I guess we'll call it a "One piece jack shaft" blows the case to pieces, But I don't have no doubt you'll have fun while it lasts. If that doesn't work, try scraping the resin out of your pipe and giving it another shot...

[Chazz of Blades]

Oh come on guys, you can't honestly tell me none of you have ever wanted to throw something together, something crazy, and just ride nine hells out of it until it breaks. That's why we have dog ugly, cheap trucks that we throw around and beat up, beater trikes and the like. Only this time, someone is making the cheap and crazy themselves. That same concept is why alot of guys sleep with girls they wouldn't want their friends to see. Cheap, easy, fun, and you don't mind if something gets broke.

I say ride it like you stole it, wear your protective gear, and drag it home when it falls apart. It's all about having fun.

[bcredneck]

it snowed like crazy last night so i ended up riding this thing around town since they only plow main roads i was able to pass cars for once
then the rear sprocet hit the curb and snaped 4 bolts after pushin it home its now perimently welded in place
the next thing i may want to add is brakes there are big hills around here and 2 strokes dont have much back pressure

[just ben]

i'm sure the garage door has alot more parts so you can get some brakes fabbed up.lol. I understand the need or want to have a suicide machine but I don't think I would want any machine I cant stop. although this thing is rigged to all hell I do respect your ambition.

[RubberSalt]

Brakes - on our blasters, we have used street bike brakes. of kantana 600s and what not - you can get calipers and pedals for about $15 off ebay if you look hard enough.

...I'd port and pipe that thing still !! get more all around power, a smoother power band. And passing some one with a drag style pipe would make them giggle. Your playing with 70s ports and pipes, i imagine you could easily get 20 percent more power throughout the ENTIRE rpm range.

[whyzee]

Priceless build!

[hillbilly 200x]

^^^^ LMFAO :lol: :lol: :lol:

[stevensj13]

Seeing this thread made my day. I wanted to do something similar for a long time. Never got a tiny junker to work with. My plans was a YZ125 water cooled 1981 motor I had lying around. The giant pipes for those things are a trailprotrailprotrailprotrailprotrailpro to fit in a small frame.