PDA

View Full Version : ATC 90 Bandito Buildup



tahiti429
11-15-2011, 04:18 PM
Here is the first of the 10 requisite posts. Let me introduce mysef. I have a couple of ATC 90s and I am in the process of building one with a Bandito frame and a 108cc big bore kit. I have done the body work and paint on the frame, fenders, tank, and forks. The paint and fiberglass work on the fenders turned out awesome. I will see if i can figure out how to post some pics.135421

tahiti429
11-15-2011, 04:28 PM
Heres what it looked like when it was donated to me. (the green one)135431

shortline10
11-15-2011, 04:29 PM
:welcome: Looks great so far .

Swinger
11-15-2011, 04:35 PM
Thats one heck of a makeover! Good job, so when can we expect to see the motor in and a video?

tahiti429
11-15-2011, 04:46 PM
135432135433135434135435Here are a few more.

tahiti429
11-15-2011, 04:56 PM
I pulled the donor motor apart and I was stoked to find it has a 54mm piston with a big dome and a web #98 cam. The cylinder looks to be in great shape as is the cam. One of the rings was broken so looks like Im going to have to find a new ring set.

ezmoney1979
11-15-2011, 05:14 PM
Very nice! Looks incredible. Are those new tank/fenders or did you restore the ones you had? Good job! Thanks for sharing:beer

tahiti429
11-15-2011, 10:00 PM
Belive it or not, they are the green ones. The fenders were in good shape for the most part. No major cracks, just badly weathered. I filled some holes someone had drilled for snaps, i guess for vinyl fender covers. Kinda like a bra on the front of a car I guess. The tank is actually a 110 tank that had a hole that i welded up and bondoed. It turned out alot better than I thought it would.

tahiti429
11-15-2011, 10:17 PM
I bought the Bandito frame from Lardog. He helped me set up the rear axle with new bearings, seals and brake shoes. Couldn't have done it without him.

tahiti429
11-16-2011, 10:05 PM
Here is a pic of me at about 8. Damn that 110 was cherry.135545

tahiti429
12-05-2011, 06:45 PM
Only 3 more.

tahiti429
12-05-2011, 06:47 PM
Sucks the spamers and scammers had to ruin it for us new posters.

tahiti429
12-05-2011, 06:48 PM
Did I mention that I joined 3 years ago.

chuckiedog04
12-05-2011, 06:51 PM
good job! looking very good. im in the proccess of bringing an 1977 Atc 90 back to life, though im not going to do a build like you!

tahiti429
12-05-2011, 08:36 PM
Thanks. Are you going to build yours stock?

ytm200steve
12-06-2011, 05:58 PM
wow i wish i could make something that nice! keep up the good work.

chuckiedog04
12-06-2011, 06:43 PM
Thanks. Are you going to build yours stock?
I am doing mine as stock frame. though i have camoed the fenders with mossy oak cloth tape (pretty much high quality camouflage duct tape). Planning on small mods like 110 carb, maybe a high performance cam, just a few little things like that.

tahiti429
12-09-2011, 07:44 PM
wow i wish i could make something that nice! keep up the good work.
Thanks for the complement. It only takes time. The paint i used is rustolem safety red, available at any Lowes or Home Depot.

tahiti429
12-09-2011, 08:10 PM
I am doing mine as stock frame. though i have camoed the fenders with mossy oak cloth tape (pretty much high quality camouflage duct tape). Planning on small mods like 110 carb, maybe a high performance cam, just a few little things like that.

Sounds like fun. You cant go wrong with a 90.

jsmay
12-22-2011, 10:35 AM
so, you painted it with cans? it looks great!

tblumer
12-24-2011, 08:22 PM
That safety red rustoleum is a real good match to the honda red, I used it for my 90's forks and headlight shell

ytm200steve
12-25-2011, 12:39 AM
i would have never guessed that was spray paint:beer

tahiti429
01-31-2012, 03:44 PM
140800

This was the stuff I used. The Rustoleum came in quart cans. It was easy to use, just thin 10-15% with acetone and spray using detail gun. I dont think cans would have turned out as good. Cans dont put out the volume a spray gun does. I did however use Rustoleum silver metallic for the clutch cover and the side cover. I think it turned out great.

tahiti429
01-31-2012, 03:52 PM
140802140803

Here is the clutch and side cover. I am replacing all of the phillips head screws with stainless allen head buttons. What do you think?

whitetail hunter
01-31-2012, 05:50 PM
looks great can't wait to see some pics completed.

tahiti429
02-06-2012, 03:43 PM
141315
Here is a pic of my cool sticker from dr.atv.

thestud25
02-06-2012, 03:48 PM
Looking good!!!

shortline10
02-06-2012, 04:19 PM
Nice !!! My kinda build Coors inspired :lol:

tahiti429
02-10-2012, 07:02 PM
Nice !!! My kinda build Coors inspired :lol:

You have to stay hydrated when you are in the garage.

tahiti429
10-08-2013, 11:55 AM
178590178591Its done. I just need to get the seat upholstered now 178589

Big G
10-08-2013, 12:28 PM
Very nice build Tahiti. The seat will finish it off nicely!

effort=results
10-08-2013, 12:49 PM
that paint job is grade A stuff . great job.

lardog
10-09-2013, 07:47 PM
Looks good buddy .:beer