PDA

View Full Version : 84 250r Swingarm Casing



Popeye
11-16-2011, 09:49 PM
Hey guys, I was wondering if the casing inside the swingarm just pushes out or do I have to unscrew it? I'm thinking it has to be unscrewed (because beating on
it didn't work lol).

Thanks for the help!

dezert250r
11-17-2011, 12:27 AM
i think your talking about the bearing carrier and yes you need to unscrew the two allen bolts and the one bolt under those that is a 10mm. also need to remove the brake caliper and then revome the ring around the carrier. i think that what your trying to say:wondering

Popeye
11-17-2011, 01:06 AM
Yea, I think we are talking about the same thing. I got the two bolts out of the back of the swingarm. I removed the sprocket and brake and everything. It's just the case and the swingarm left. I'll check for the other stuff tomorrow. I thought I
had everything out though. Thanks for the input man.