250R Wide footpegs

[Craig B.]

I have seen some guys using wider footpegs on there 250R's. Are there any that bolt on with no mods? Will the TRX 250 pegs bolt on?

[250rRoostmaster]

You can mount the pegs i make with no mods depending on how you want to mount them. The only "mods" required would be drilling 2 holes in each peg if they dont already have them.. What year R? I know 85-86 R's already have holes in the pegs that you can use to mount them up...

[Craig B.]

Thanks for the reply. It's for a 86. Do you have any pics. Looking for something a little bigger, but around the stock height and setback.

[250rRoostmaster]

Here's my thread...http://www.3wheelerworld.com/showthread.php/135723-250r-350x-250sx-250es-200x-Wider-footpegs!!

They wont require drilling if you use the holes already in those pegs, but since one one them is pretty big you might need a washer in between but that's it.

[Craig B.]

Thanks for the info. I won't be able to view the link due to the [cool newbie rules]. Thanks

[Craig B.]

This is what i had in mind.

[URL=http://rides.webshots.com/photo/2771901090075991182ImdCFC]http://inlinethumb09.webshots.com/32776/2771901090075991182S600x600Q85.jpg

[dcreel]

These are Blingstar footpegs for a 450R.. Jason Hall on the site makes adapters to use the 450R pegs. You can also use the oem 450R pegs which are larger than the 86 250r pegs.

http://i176.photobucket.com/albums/w182/dcreel/003-30.jpg
http://i176.photobucket.com/albums/w182/dcreel/004-32.jpg
http://i176.photobucket.com/albums/w182/dcreel/005-31.jpg
oem 450R pegs on top of the Blingstar pegs
http://i176.photobucket.com/albums/w182/dcreel/006-23.jpg
450R next to '86 250r pegs
http://i176.photobucket.com/albums/w182/dcreel/008-17.jpg
My 10.5 shoe on the Blingstar pegs
http://i176.photobucket.com/albums/w182/dcreel/009-15.jpg

[Craig B.]

Thanks for the pics. The Blingstar pegs are close to what i have now. I may get some 1/4 steel and make my own bracket. I want the pegs to be the same distance away from the shifter and brake as the stock pegs.

[250rRoostmaster]

137418137419137420137421

[250rRoostmaster]

There's a couple pics of my product, they can be moved out up to 1.5" from where they are in those pics

PS. In the last pic the holes were not countersunk so that's why the bolts are sticking out a bit

[snap911]

those are nice pegs.

[moomba010]

Those look real nice... I will check out the link as soon as I reached 10 :-)