Finished BW200 and 2 BW350's under construction

[Doink]

Hey all,
Just posted a BW200 on eBay for $800. It's super clean and has an OEM rear rack and great plastics (except front fender) but probably needs a front tire.
I'll be done with a BW350 in a week or two and that will go on CL for awhile and then eBay if no real offers.
+Doink

BTW any help on how to include pics without a HTML address?

[Doink]

I'm also trying to get a different wheel for the rear of a BW350. The rim that's on there is 9" and should take a Dunlop KT647 23x11x9 tire.
I need either:
a Dunlop KT 647 tire OR
a wheel that is 10" where both inner and outer rim is 4.75" from the centerline.
The 10" wheel sizes are a must in order to mount the sprocket and maintain the geometry. Did I mention the bolt pattern is 4/125?

[Doink]

SOLD! BW200 is gone to Arkansas... now for the more important question: where to spend all that money?!

[Hooperdog]

I'm in need of a side fender pc for a 350, might you have one?

[M.Pargiello]

I will add a bw350 to my collection one day

[jp212]

Any updates on the 10" rear wheel? I found a couple with the correct offset after reading some threads on the advrider forum, but the bolt patterns were too small unfortunately.....I think the largest bolt pattern I came across was 4 by 115mm.