PDA

View Full Version : Por 15 HD tank repair



Thresher
01-03-2012, 11:59 AM
Anybody have any experience with the POR 15 tank repair? I've used the PRO 15 on an old Jeep and it worked well. Hope the tank liner is as good. The previous owner had used Kreem and it was all pealing off inside. Thought I'd try the POR 15. have a few pin holes in the tank, hoping this seals them also, any input greatly appreciated

3wheely
01-03-2012, 12:23 PM
I just used por-15 on my 250sx tank last week. I'm not sure about pinholes as mine didn't have any. It's a timely process but it worked well. The only issue I had was getting the access coating out after swirling it around in the tank. I ended up using a shop vac and sucking it out. I let it dry for 5 days and was good to go.

Thresher
01-03-2012, 01:45 PM
Thanks Wheely, I just ordered the kit. I was told the reason it sticks, works, so well is because it is paint mixed with super glue. Mine is for a KLT 160 and I have not been successfull in finding a replacement tank, so I'll give it a try.