85 350x axle bearing carrier questions.

[loowho]

I am currently in the process of seaching for a axle carrier for my 85 350x.
I have removed the axle and carrier but have beat up the stock carrier. Dumb moveon my part i forgot to take out the bolt on the bottom of the swing arm and kept pounding away.
Rad manufacturing makes a carrier but it is over 200! I found a carrier on ebay for an 86 and it says you have to counter sink the sprocket and use flush bolts. That carrier is only 100. Has anyone used a86 carrier on an 85.
Any feedback would be greatly appreciated.
Thanks in advance.

[twitch101]

buy the double row carrier from eastcoast atv. it comes loaded with bearings and ready to install for 100. yes you will have to switch to an 86 carrier and countersunk bolts.

[loowho]

So i would countersink an 85 sprocket. Does east coast sell the bolts to.
Thanks man

[KIM 501]

buy an 86 spocket,i am going to the country today will look to see if i have some tapered bolts

[loowho]

I was under the impression that a 86 sprocket would not fit the 85 sproket holder

[KIM 501]

found the tapered bolts they are on my 85 350x.i also had that prob with the double row carrierso i used the tapered bolts,86 sprocket,large feder washers and nylock nuts,has had alot of run time includimg a recent 4hr trip at lost trails and have had no prob.

[loowho]

thanks man just order a rad man. oem specs a little more money but it will do

[big specht]

Ok this is a old thread but I just broke my carrier on 85 and there is alot more 86 and up carriers out there . Is all I have to do is counter sink the bolts in the sprocket and get new bolts to use a 86 and up carrier???