help me identify my X

[travi]

bought a dis assembled 198? 200x converted to auto x with high and low range , i need to order an axle and other misc things but i can not determine the year , no vin that i can can and no sticker , here are some pics of the frame and swinger , any quick help would be appreciated as i want to start ordering parts tonight . thanks in advance.

140237140235140236140238

[shortline10]

Its a 1983 200x

[travi]

awesome thank you very much for the fast reply .

[350XJEDI]

:Dthe swingarm is 1983 but, it could be any83-85 frame check the vin# . the auto-x with high/low is a sweet bike . the moter is prob,:wondering a 200m but yours dont have the electric start,' oh well still be a good project:cool: good luck

[travi]

the elec start is there but will not fit around the frame , i cant believe how fast the reply's are on this site , i read somewhere that i can use cr 85 brake parts to complete a rear setup , is this true ? , can i use the caliper and mastercylinder with a longer hose ?

[350XJEDI]

yes you can use cr85 brakes you may have to mod the mount for the master ,and you need the stock 200x caliper mounts/bracket . to fit the electric start you need to dimple the downtube a little ,on mine we reinforced the tube on the front and cut /welded the dimple in works good ..

[travi]

cr85 pads to go along with i assume ?

[travi]

is there anywhere i can buy the swing arm bolt apparently it was not in the box of parts.

[JJMF1979]

ya you can probebly find the pivot bolt on here in the classifieds or on ebay i just bought one myself i'll let you know if i come across one

[travi]

thanks appricate it , if anyone has the dimensions for a pivot bolt and those delrin bushings i would greatly appricate it , in second year machining and i can get away with making a couple things for myself when the instructor is in a good mood .

[rodeofan5656]

its definately a 1983-1985 200x. the tank flares, round tubed frame, and nonelyptical carrier shows that its not an 86 or 87

[atc300r]

The 83-85 200xs are almost identicle .There are a few differences.Like the 83 swingarm is different but I think the parts are all inner changable.I also have a 200x auto.Its a 83 with a 185s engine in it.I got a good deal on the 200x complete roller minus the engine $50.Had A 185s given to me so I put the s engine in the x.The only difference is the you have to use the 200x intake .And fab up a new rear brake pedal setup.Good luck with the build.Also the vin # is on the frame neck left side I believe as you are sitting on it.

[travi]

sweet thanks for all the info guys , all the parts i need to get it rolling again are on the way , except for that damn swing arm pivot bolt , time to make one i guess , do ANYONE have the dimensions for it ? , im a second year machining student and have access to a full machine shop , im not allowed to do major work but my instructor will let me get away with making a bolt , so if anyone has those dimensions or one to sell let me know ASAP, thanks guys.

[atc300r]

You should beable to make one out of a front axle 200x or 250r axle.Thats what im using on one of my 250rs.