PDA

View Full Version : Atc200s mods?



Buckizbrutal
02-09-2012, 09:38 PM
Hey guys, I'm new to the site. I have a 84 atc200s I picked up for $100 and i put about $100 into it. I have it running after a good carb clean new throttle and cable and a carb rebuild, but there's a large hole in the exhaust. I have a dg rcm I have not put on yet but going to this weekend. I found a lot of good info on this site but its all spread out and I don't know that much about compatible parts and what is different between the 200 series. I heard a lot of talk about the xr200 motors and being able to swap parts between the two. I would only really like to hear about parts that fit the 1984 atc200s specifically. Just want to know my best options to get the most out of my 200s.

Buckizbrutal
02-10-2012, 01:25 AM
Hey just me again, thought I'd just post some pics for you guys to see what I'm working with. Nothing real pretty but for $340 in w/ the dg exhaust, still not on, it runs strong as it sits. Just had a couple inches of snow and just had to get her out since I just got it running.

Buckizbrutal
02-10-2012, 01:37 AM
141611141612

Buckizbrutal
02-10-2012, 01:39 AM
i already rebuilt the pull starter, i have the chain guard but might be in the market for a new one, for the right price. a lil jb weld and some spray paint would prolly do the trick one the one i got.

Buckizbrutal
02-10-2012, 09:36 AM
Also, what do you guys think will need to be done to make it run correct with the dg rcm exhaust of anything. Please guys I'm desperate for info here.

dirtdemon
02-10-2012, 02:54 PM
i dont think you need to do anything to it for the exhaust i think it will be fine. these are tough little bikes.

Buckizbrutal
02-10-2012, 02:58 PM
Cool, thanks for the input, I don't have the air filter lid. It didn't come with it so there should be enough airflow.

dirtdemon
02-10-2012, 03:09 PM
i would get a lid. make sure you have a air filter.

Buckizbrutal
02-10-2012, 04:22 PM
Yea he filter is in there I put a screw type clamp on it it won't go anywhere but if it helps it run I'll get a lid off ebay