PDA

View Full Version : Wiring help with my ATC 110



badbronco
03-14-2012, 07:58 PM
Hello-

I just picked up 3 ATC 110's and they were in parts. I am restoring them and am ready to wire them. The questions I have is the current motor, not sure what year has the following wires.
1 wire out of the (altenator I think) its under a cover on the side of the cylinder. Does this one go to the coil?
2 wires out of the (generator I think) that is directly behind the pull start rope.
Where do these wires connect?

Does the green wire that appears to go to ground on the coil for the shut off switch.


Thanks
Tim

3wheelerfan1991
03-14-2012, 08:48 PM
Look at the wiring diagrams on the home page. labeled "Honda wiring diagrams" or just go through this : http://www.3wheelerworld.com/content.php/193-ATC110