PDA

View Full Version : Axle change out



remsandpets
04-07-2012, 06:20 PM
I purchased a complete axle for my honda 200. Seller stated it was off a 185. All parts look right but the hubs will not fit my wheels. The bolt patern is too small. I need Aprox. 5 7/8 bolt pattern. Or 150mm. Anyone have hubs to sell or swap for what seems to be for a 185?

shortline10
04-07-2012, 07:36 PM
I prob have a set of the larger hubs . Can check tomorrow for you .

bigred22
04-09-2012, 05:00 AM
i've got an extra set, the correct ones should be for 9" rims, is that what youre rims are?

remsandpets
04-11-2012, 04:49 PM
My rear tires are 25x13x9 wooley boggers or close to that spelling anyway.

bigred22
04-12-2012, 05:02 AM
My rear tires are 25x13x9 wooley boggers or close to that spelling anyway.the hubs i have would fit youre wheeler

remsandpets
04-15-2012, 03:55 PM
Well the 1985, 185 rear end bolted right in to my 83 200 honda. The bike is back together and running. The rear sprocket was smaller on the donor axle so I just used that one and took out 2 links of chain to give me enough to tighten up the chain. When I get to it I will purchase new shoes for the rear and the swap should be complete. Thanks all for the help and advise.