gazer
04-16-2012, 06:55 PM
Hi, Im new to this so bear with me. I have a '83 honda 110 that I just bought, and I cannot get the Lights to work. I have power to both the light sockets per a light tester.
My tail light will barly glow with the bulb in. Is this a AC current? ive tested my volts at the socket and im gettin 0 DC and 78-82AC at idle is that right? ive also tested the ohms at the alternator at 449, I read that it should be between 100-400. Ive looked at the wireing diagrahm and it seems pretty basic but I cant find anymore details about outputs. The wheeler starts usually on the first pull and runs good, any ideas?
My tail light will barly glow with the bulb in. Is this a AC current? ive tested my volts at the socket and im gettin 0 DC and 78-82AC at idle is that right? ive also tested the ohms at the alternator at 449, I read that it should be between 100-400. Ive looked at the wireing diagrahm and it seems pretty basic but I cant find anymore details about outputs. The wheeler starts usually on the first pull and runs good, any ideas?