Timberwolf clutch in a 225dx?

[Adam77]

Hey I was wondering if anybody has replaced their centrifugal clutch with one from a timberwolf or beartracker?I have been doing some searching and came across this as an option.I'm also wondering if I could use the new timberwolf clutch with the original clutch housing from the 225dx or am I just wishful thinking.Not that I wouldn't love to buy all brand new parts and slap em in but all together everything is about 400$.Or if anybody has any other Ideas that are on the cheap I'm all ears.Thanks in advance.

[Lil Earl]

go on cheap cycle parts and look at the part numbers, i have a 225 as well, but i never tried it, but cheap cycle parts should have some in stock although they are around 200 dollars

[Adam77]

go on cheap cycle parts and look at the part numbers, i have a 225 as well, but i never tried it, but cheap cycle parts should have some in stock although they are around 200 dollars Thanks Earl I looked into it a little more and it seems like I can use a clutch from a timberwolf with the stock 225 clutch housing.So worst case scenario is about 200$ like you said.

[muthey]

I saw just last night that babbits sports center still has oem 225 dx centrifugal clutches for 213$, so if they do why not go original. http://www.hondapartshouse.net/pages/OemParts?aribrand=HOM#/Yamaha/TRI-MOTO_-_YTM225DXN_-_1985/CLUTCH/YTM225DXN_%281985_ALL_TERRAIN_VEHICLE%29/CLUTCH_%28YTM225DXN_-_1985%29

[Adam77]

I saw just last night that babbits sports center still has oem 225 dx centrifugal clutches for 213$, so if they do why not go original. http://www.hondapartshouse.net/pages/OemParts?aribrand=HOM#/Yamaha/TRI-MOTO_-_YTM225DXN_-_1985/CLUTCH/YTM225DXN_%281985_ALL_TERRAIN_VEHICLE%29/CLUTCH_%28YTM225DXN_-_1985%29 That's too funny I did alot of searching for oem 225dx clutch and came up with nothing.While looking for the timberwolf clutch I found that babbits had the best price so that is where I was going to order from.Guess I should have looked for the oem 225dx clutch first!!!! Thanks muthey.

[muthey]

I always like to reference through babbits, however even if they say they have the part it doesn't mean they actually have it i have learned.

[Adam77]

I always like to reference through babbits, however even if they say they have the part it doesn't mean they actually have it i have learned.HAHA!! I'll post the outcome when I place my order.