View Full Version : Anyone have a Harbor Freight motorcycle lift table?
I was thinking about getting one and making some extensions for the front and rear to hold a trike or quad. There is a coupon for $300 off and its $299 with the coupon.
Here is the link to the table.
http://www.harborfreight.com/1000-lb-capacity-motorcycle-lift-68892.html
atc007
04-22-2012, 12:45 PM
I don't think you can go wrong there Bryan! I have the Handy lift,so the tubes were already there for the "pipes" to go into for the quad extensions. I didn't see them on this one glancing at it quickly? But for 3 bucks,,pull the trigger! I want their " high lift atv stand" Very nice for quick jobs.
Dirtcrasher
04-22-2012, 04:45 PM
HF has many excellent alternative tools.
Lots of there stuff just needs a gusset here or there or some type of clever solution to prevent failure.
DC I agree. Almost every HF tool I have has needed a little "tweeking" so to speak, but has performed great vs. the cost of some of the big brand items.
Angore
04-22-2012, 05:59 PM
A buddy of mine has one , out of the box it was just a little wobbly , he drilled out the bolt-holes on a couple of the lift arms and added bushings with the correct size bolts and now it's rock-solid ! Good investment IMHO.
brapp
04-24-2012, 03:43 PM
i just use a swt of saw horses a shee tof plywood and a se tof ramops to rioll it up to workign level
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.