good air filter for a tri z

[TRI-CYCLE]

Mine is toast. Thus previous owner scares me. What after market filters do you guys run?

[Cujo909]

My suggestion is stick with foam filters, uni or moose make good ones.

[TRI-CYCLE]

OK thanks, and they have to be oiled correct?I'm new to 2 strokes...Thanks again

[Cujo909]

Yup. Pj1 makes a tacky spray for them that works good. Clean often.

[wisconsinite]

Yup, i like foam filters. I run uni, you can get them for tri z for about $20.

[badass350x]

are you using the stock air box? If so then I recommend the K&N, If not I still recommend a K&N!!! But either way use a pre-filter from K&N even if you go with a foam filter, to much protection never hurts!

[TRI-CYCLE]

Yes stock air box from what I can tell. OK guys thanks. These 2 strikers are like classy woman in maintenance compared to my old 200x haha

[4x4van]

These 2 strikers are like classy woman in maintenance compared to my old 200x hahaThat may be, but I really hope that you oiled your 200x air filter as well. There isn't any difference between 2-stroke and 4-stroke when it comes to the air it's breathing!

[TRI-CYCLE]

I have not, but I have very few hours on both machines, waiting for my vacation in a few days to do full maintenance on both machines.

What kind of 4x4 van do you have? I have a factory 74 quadravan econoline super van with HD 44 front and 60 rear. Wagon doors on side. 4 wheel drive vans are my other hobby!!

[2+1=fun]

K&N for sure. Quality at its finest

[4x4van]

I actually no longer own a 4x4van, but I did for so long that the name is kinda hard to get rid of, you know? It was a '89 Toyota 4x4 van, fully loaded LE, lifted, BFGs. I drove it for 15 years, daily driver plus alot of off-road use. Tranny finally gave up at almost 400,000 miles, everything else was still good.

[TimSr]

I run both a Uni and a K&N. You wont notice any difference in the way it runs. The K&N has more surface area so it takes longer to start clogging, but its mostly a matter of which one you find easiest to clean and service very frequently. Also the K&N does not require the plastic filter cage, as the foam does, so if its missing KN is the easy fix.

[wisconsinite]

I have not, but I have very few hours on both machines, waiting for my vacation in a few days to do full maintenance on both machines.

What kind of 4x4 van do you have? I have a factory 74 quadravan econoline super van with HD 44 front and 60 rear. Wagon doors on side. 4 wheel drive vans are my other hobby!!
a quadravan, awesome!! i've got a 72 E300 (only 2 wheel drive though) camper-conversion. mine has a dana 60 also. 300 six, 3-on-da-tree, ice box, stove, etc. i love the 2nd gen ford vans.

[TRI-CYCLE]

Nice 4x4van. Those yota vans are rare as hell these days!

[TRI-CYCLE]

a quadravan, awesome!! i've got a 72 E300 (only 2 wheel drive though) camper-conversion. mine has a dana 60 also. 300 six, 3-on-da-tree, ice box, stove, etc. i love the 2nd gen ford vans.
Good work man. I love them to. I found mine in a field in Gillette Wyoming while working in the coal. Body WAS RUSTY. but luckily the guy rebuilt and cammed the original 302 and mated it to a brand new c4... than parked it field bound. Traded one of my revolvers for it and drove it home lol. Its had some major body work done for sure

[kyleb]

Most foam and K&N style filters are going to be high flow and better than factory

[TRI-CYCLE]

Ended up buying a new moose foam filter for the tri z. Haven't installed it yet though.. never oiled a foam filter before. I've got a k&n recharge kit for the original filter though. Can I oil foam with the k&n spray and install that Bad boy?

[BIG DADDY TRI Z]

sounds like some work good luck

[badass350x]

does anyone have good gas cap for a 1895 225 dx mines got crack in it,thanks

I would say start your own thread about what you need BIGDADDY and you might get some answers!