PDA

View Full Version : Trikefest 2012 swap meet post em up



captainweezy
05-30-2012, 10:06 PM
Was waiting for someone to throw this up and nothing yet so here goes. I am not sure what else I am bringing but here are just a few parts that will be making the trip that I had already taken pics of......When I really get some time, I will get a bunch of parts down and snap some pics. Please feel free to post your parts up. Or wanted items. Cant believe this is already less than a month away.
Possibly a 1985 running great 250es big red with title for sale...This is a one owner trike unless I buy it and it will be a 2 owner. Average condition for an 85---would rate it at a 6.5 to 7...It is for sale for $1,000
1983 clean 185 also for sale for $300

350x tank-$50
200es fenders in good shape $80-pair
86 350x forks new but have some shelf type wear-?
200x tank clean inside-$40
atc 90 rear fenders./seat combo-seat pan not that good-$ make offer
81/82 250r air cooled -$200 pm me for details(new parts)
198? atc 70 bare motor-$35 plug is stripped
2 of the plastic tanks from a Kawasaki prairie? 250 $5-both-just want these out of my shed

84 tecate frame-nice condition no cracks welds or issues-$40-must prepay so i don't have to drag back home.
Depending on my trailer situation, I may be bringing 3 185s's mostly complete. 2 run also

If you want pics of any of this stuff, pm me so we don't clog this thread up too much.I plan on bringing
another good load of parts. I really enjoyed meeting everyone last year.
Here is a more updated list.

Trikefest parts list:
350x forks new
350x tank- plastic
350x rear fenders-red
250r motors- 2-3 all air cooled
200x forks
200s forks
250r forks 1st and 3rd trailprogen
250 Big red tank- rough
200es rear fenders
Early 200/185 2 piece fenders
Recoils
85/86 250r frame
84 Tecate frame
350x misc parts
Big red 250 seattrailpro
Big red 250 dash with key
90/110 rear fenders (2-3)
(2-3) trailpro110 90 200 throttles
Assorted Shifters
185/200 front sprocket covers
250r exhaust
Gold rims- not sure what bike?
Atc 70 motor, pegs, chain guard
81/82250r tank
83 110 tank
110 pegs
Spray painted red 200x tank
200s axle
Kawasaki parts-mainly 84 tecate
Lil atc 70 alum rims and turf tires
86 200x parts-almost comp. Bike
2 1983 185's. 1 84 200s
Who knows what else....probably a couple boxes of $5-$10 stuff

big specht
05-30-2012, 11:04 PM
Been busy sorry I normaly start this thread earlyer

Big Mike
05-31-2012, 12:32 AM
Wanted: honda 185 motor not an s but a 1980 185. Will take whole motor if needed but need at least bottom end with good crank. Thanks. Let me know price beforehand

captainweezy
05-31-2012, 04:29 AM
Wanted: honda 185 motor not an s but a 1980 185. Will take whole motor if needed but need at least bottom end with good crank. Thanks. Let me know price beforehand

I am pretty sure I have one. I will have to run some vin numbers though. I have around 20 of those type of motors. Some are marked with a year, others are not. Any reason why it has to be a 1980?

Big Mike
05-31-2012, 09:27 AM
Well I am building an 80 185, but I mean, I am not going for a period correct, matching numbers machine so whatever will work will be fine. Some knucklehead peened and split the end of the crankshaft behind the pullstart so it is going to need at least a crank but if I can find a complete motor or at least bottom end for cheap money it would be easier to go that route.

Chickengizzard
05-31-2012, 04:30 PM
Big Mike - I have a 80 185 machine I bought in parts, and still in parts(no time). Motor is still in the frame, no clue if it runs. I'll sell you the whole machine, or what evers there. If you want it.

Also have 3 or 4 totes of 350X parts that I'm bringing to T-fest.

Big Mike
05-31-2012, 04:33 PM
What kind of $$ would you want for the whole machine?

Chickengizzard
05-31-2012, 05:41 PM
$125 pick it up @ T-fest

Chickengizzard
05-31-2012, 05:49 PM
here are a few pics of it
147622147623147624147625147626147627

captainweezy
06-01-2012, 07:49 AM
Dang mike, i would love to sell you a motor but i would be all over that 185 that chicken gizzard has up.Thats a pretty good deal.

u.p ted
06-01-2012, 08:14 AM
looking 4 any one that would have a good 350x tank, to pick up at TF

MIK6
06-01-2012, 10:50 AM
i need 86 200x brake parts. need 85 350 rear master. and im looking for 8in alum 4/110 rims..

MIK6 / Mike

Gag_Halfront
06-01-2012, 01:05 PM
Mike, I might have the rims you need. Sorry... No tralpros on them. You'll have to source those separately. ;-)

Chickengizzard
06-01-2012, 01:14 PM
I'll have a couple of rear brake sets for a 350x at trikefest.

big specht
06-02-2012, 01:34 PM
147852I have some BRAND NEW carlisle tires and some with wheels all new 25-11-12 they are stock polaris 6x6 rear tires. Tires are 60ea and tires and wheels 80ea they are stock steel wheels 4 on 156. i will try to post up a pic monday Let me know who many you want cause I'm not bringing alot with me to TF to just haul back home These are brand new take offs PM me on how many you want

RoscoW
06-03-2012, 09:05 PM
I have a bunch of stuff in the classifieds. any and all can be brought down to Trikefest. Here's a link to the thread
http://www.3wheelerworld.com/showthread.php/144759-3rd-gen-250r-parts-Dunlop-Tires-Tecate-Fenders

Ross..

ATC-Eric
06-04-2012, 01:27 PM
Im going to have a 1984 200es engine that runs good, no smoke with me. Shifter is welded to the shaft. Dont know what I want for it. Probably have some other stuff with me, Ill update when I can.

hoosierlogger
06-04-2012, 06:32 PM
Ill probably bring some first gen 200x stuff that I have left. Possibly some 200s things. Whatever I have room for, Hell I may not bring anything for sale.

tapper190
06-04-2012, 06:50 PM
I'm looking for a rear brake pedal for an '85 sx, anyone got one they want to part with?

Tapper

MIK6
06-04-2012, 08:17 PM
Ohh ya.. i forgot i need 2 fork tops for 86/87 tecate.. anyone have a set of beat up 86/87 tecate forks?

MIK6/ Mike

captainweezy
06-05-2012, 08:47 PM
I'm looking for a rear brake pedal for an '85 sx, anyone got one they want to part with?

Tapper

Got you covered on that one, need to check it out and make sure it is good though. I assume you will have a 350x rear swing skid?? I will prepay if I have to. I do not have one at all. I know I have messaged you about it before.

captainweezy
06-05-2012, 09:01 PM
147852I have some BRAND NEW carlisle tires and some with wheels all new 25-11-12 they are stock polaris 6x6 rear tires. Tires are 60ea and tires and wheels 80ea they are stock steel wheels 4 on 156. i will try to post up a pic monday Let me know who many you want cause I'm not bringing alot with me to TF to just haul back home These are brand new take offs PM me on how many you want

Holy crapolly where did you find a monster pile like that?

big specht
06-05-2012, 10:53 PM
The place beside where I work has them . If know body says they want any before TF I might just bring a set or two . You bringing a trailer full??

tapper190
06-06-2012, 05:51 AM
Got you covered on that one, need to check it out and make sure it is good though. I assume you will have a 350x rear swing skid?? I will prepay if I have to. I do not have one at all. I know I have messaged you about it before.
Thanks, no prepayment is required, I will have some skid plates with me, you just have to tell me were you camp. If you have met John Swinehart, he will know what area I will be camped at.

Tapper

captainweezy
06-06-2012, 07:21 AM
The place beside where I work has them . If know body says they want any before TF I might just bring a set or two . You bringing a trailer full??
i plan on it. That was awesome meeting all you guys. Im leaving my house wednesday at some point. Will def see you there. Going to pick a 7x14 enclosed up this weekend.

captainweezy
06-06-2012, 09:19 PM
147852I have some BRAND NEW carlisle tires and some with wheels all new 25-11-12 they are stock polaris 6x6 rear tires. Tires are 60ea and tires and wheels 80ea they are stock steel wheels 4 on 156. i will try to post up a pic monday Let me know who many you want cause I'm not bringing alot with me to TF to just haul back home These are brand new take offs PM me on how many you want

Are those the 489's or 589's? I sent out a mass text to a bunch of people asking if they wanted any. Maybe I can grab a few from you. Are they all the same size or do you have any fronts?

big specht
06-06-2012, 10:56 PM
I'm pritty sure they are all 489's and fronts are hard to get mostly all rear Let me know how many you think may want so I know how many to get

Xowner
06-07-2012, 11:46 AM
engine,pipe,footpegs,pullstart,seat and frame all sold. Anything else is up for grabs.


http://i190.photobucket.com/albums/z119/Xowner350x/100_0284.jpg

Frame,bar pad front forks and hub sold. Engine sold also have the rest.

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyNzMtMjAxMjA1MTEtMTUyNy5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyNzgtMjAxMjA1MTEtMTUzOC5qcGc.jpg

keister
06-07-2012, 12:46 PM
I am looking for a fork cap off a Yamaha 225 (DX?). Here is a picture of what I need.
148069

Also, and this may be a long shot.... I am looking for a nice (possibly custom) 350X headpipe / midpipe. I am turning my 350 into a 400X very soon and my old rusty skinny stock headpipe isn't worthy of the new build. If anybody has something that might fit the bill, I am very interested.

Gag_Halfront
06-07-2012, 01:19 PM
Keister, I'll check my collection. I _may_ have what you need. If I can find one, you can have it.

tecat-z
06-09-2012, 01:02 PM
All of this will be availiable at TF. If you want anything in particular beforehand, let me know and i'll hold it.

Oem grille assy for 84-85 Tecate. Very nice... $20
Partial NOS front rack assy for 83-85 atc 110, atc 125m 84-85. Needs side support bars only, easy to make. $20
Perfect oem shift petal for liquid R. Even includes oem Honda bolt. None nicer. $25
85 Tri-z oem front wheel and tire. Very nice wheel, and tire combo. 60% tire left with no repairs. $50
Pair of Armstrong Turf Tamer tires. 20/11/8. As good as new, and no repair history. Will work great on many machines from atc 110, to 250sx, or even Tri-z or 250R w/ 8' wheels. $50
Pair of Tri-z cylinder cores. Both at 70mm on oem liner. Both have stock port layout. Some cosmetic flaws but otherwise great for B.B. or re-sleeve . $35 ea, or pair for $60.
oem 85 Tri-z plactic combo. Nothing but good rider quality plastics. Great stickers, but all have some flaws. But great way to spruce up a old rider for cheap. $120
84-85 Tecate oem axle. Very clean and ready for use. Was blasted and replated years ago. Straight, great rider quality. $40
85-Tri-z swingarm. All oem w/ no damage or repair history. Would work on 86 too. Needs complete blast, paint, bearings. These can be tough to find in straight shape. $25
Tri-z Rad lock. Perfect condition, like new. Billet alm. $20
Tri-z oem axle jam nuts. Perfect oem locks. $10
84 Tecate Tank. Fair color, and has 84 decal shadows. Tank only. $15

I am having trouble uploading pics, as i have nice ones of everything for sale. I'll get them up soon i hope.

Xowner
06-09-2012, 11:49 PM
ED ill take both the Z cylinders at TF. sending pm also

Bryan Raffa
06-10-2012, 07:48 AM
Lookin for a DR bottom end .....

Howdy
06-10-2012, 10:40 AM
I have a YT175 rolling chassis I do have the motor for it ( motor needs a lot of work ). I don't have pictures of the rolling chassis and parts that came with it yet.

I also have a bunch of other parts from a 175 and a 125 that was retired years ago. I have rear fenders, seats and all the parts in the pictures below.
$150 for everything or Make me an offer.
I will only bring all the stuff to TF if someone is interested in it ( I am running out of room quickly ). I do not want to bring it home!!

148220 148221148222148224

Xowner
06-10-2012, 11:07 AM
Rear fender has no cracks, has some deeper scratches but no cracks. The seat is pretty nice with a few stains and one hole up in the right front corner. Tank is mint inside and really nice paint but has some chips from shelf life. Some one did a shitty job touching them up.

Guys if your interested in these make offer I have no air cooled R Need them gone. But im not gonna give these away .

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyODktMjAxMjA1MTYtMjAyNy5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTAtMjAxMjA1MTYtMjAyNy5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTEtMjAxMjA1MTYtMjAyOC5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTItMjAxMjA1MTYtMjA1NS5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTMtMjAxMjA1MTYtMjA1Ni5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTQtMjAxMjA1MTYtMjA1Ni5qcGc.jpg

captainweezy
06-10-2012, 11:23 AM
I have an 86 200x that does run and is a great mosquito fogger. O yes she is a real cutie, especially with that perty rear first gen 250x fender and super charged blue duct taped seat.The brakes are spoken for. The rear tires are spider tracs that are actually more worn out than a crapper on chili day at the VA hospital. Gas tank is damn nice though on the inside and not bad on the outside. Probably the most expensive part on it. I wont be sure if I will have room for this so if you want any parts, let me know. I have a ton to do before TF still so I am not going to be jumping thru hoops to tear the motor apart for a gear, I mean I don't have time to do that AT all! So Hoping somebody needs something simple like those super cool custom headlights:lol: I will starting to get the trailer loaded up by Wednesday, and will then know how much room I will have. If someone is interested in the whole thing, please pm me...250r parts lot-how bout $35, tecate fenders-make me your best offer! These will sell, need them gone, Also have 2-3 front fenders as well. 25x13x9 big red tires, big red seat, Huge couple boxes of tecate parts-if any interest, please make me an offer on them all,,,seriously I have no plans with them and no one around this area has Kaws, I may even through in a free t-shirt!

MIK6
06-10-2012, 04:36 PM
Hey captain.. will you sell the blue tank scoops off the tank? I understand if you keep them w the tank.
Let me know
MIK6/ Mike

captainweezy
06-10-2012, 04:56 PM
Haha yep but they are magically red underneith! Also i got a hair up my booty and started tear down. I will bring any of it to TF including the frame, i got your brakes off first. What all do you need? I have thecomplete assembly

blue27
06-10-2012, 06:07 PM
looking for a set of straight 83-84 250r forks, can have blown seals.

hoosierlogger
06-10-2012, 08:10 PM
I am looking for a set of rear first gen 200x rims (or the same bolt pattern they can even be 9" rims) with good tires (no balloon tires)

Itrike
06-10-2012, 09:31 PM
Headlights set up for a 350x , one flood beam one spot beam. comes with extra bulbs. $90
85 250r RAD dual row carrier, great shape, you should replace the bearings. $35
85-86 250r PRM Baja grab bar only used a couple times, has a few scratches but is still real nice$35
85 350x/250r tool box. The mout toward the lid end is broken around the bolt hole. Still bolts up $10
http://i397.photobucket.com/albums/pp55/Itrike/PTDC0016.jpg

Gag_Halfront
06-11-2012, 02:04 AM
Curt, does the PRM bolt up to a 350x? If so, I'll buy it. Wish I could afford the lights right now. That's a badass rig! :beer

Tri-ZNate
06-11-2012, 02:32 AM
I need a set of upper tri-z motor mounts, left 250es front fork and front axle

keister
06-11-2012, 09:51 AM
Itrike, please put my name on the toolbox. Thanks!!

Big Mike
06-11-2012, 09:54 AM
That headlight setup doesnt tax the electrical system too much does it?

Dirtcrasher
06-11-2012, 04:22 PM
I'm looking for a rear brake pedal for an '85 sx, anyone got one they want to part with?

Tapper

Got a pic? I must have one from my super 250X projects :D

85250r313
06-11-2012, 05:10 PM
I have some 1986-87 tecate parts, frame, forks, radiators, gas tank, 2 rear wheel hubs. also have a 1978 atc 90, i am the second owner. runs good, has aftermarket pipe. pm me with any interest. and one more, 1985 atc 200s. all there, wont start without carb spray, no smoke. just havent put time into figuring it out. tool kit under the seat still. i can deliver all to trikefest. looking for 300 bucks out of the 200s and 275 out of the 90.

MIK6
06-11-2012, 05:15 PM
I have some 1986-87 tecate parts, frame, forks, radiators, gas tank, 2 rear hubs
do you have any pictures of the T3 stuff? Pm me w a price on what you have..
Thanks MIK/ Mike

Itrike
06-11-2012, 08:59 PM
That headlight setup doesnt tax the electrical system too much does it?

I ran it on mine, has 50 or 55 wt bulbs in it now. There are also some 35wt bulbs that come with it(ran them with a stock 250r set up) they were on my trikes last year at TF. The ones in tyhis set up I had on my stock 350x. Bill I'll set it aside for ya.

ctk
06-12-2012, 05:00 PM
Anybody got a good set of handlebars for a 83-85 200x? Will meet with cash in hand

tapper190
06-12-2012, 05:02 PM
Got a pic? I must have one from my super 250X projects :D
thanks for the offer, but I'm all taken care of.
Tapper

Howdy
06-12-2012, 05:03 PM
Anybody got a good set of handlebars for a 83-85 200x? Will meet with cash in hand

I will bring some handle bars.
Howdy

mollie8000
06-12-2012, 10:26 PM
define good please.have some

kiser
06-12-2012, 11:01 PM
Hey tacat-z ill take the 20/11/8 turf tamers at TF if they arnt spoken for already. Thanks

Chickengizzard
06-13-2012, 06:15 AM
I am also bringing a coworkers 70 that will be for sale. Don't know the details on it yet just know I'm going to pick it up today.

Big Mike
06-13-2012, 08:27 AM
I am also bringing a coworkers 70 that will be for sale. Don't know the details on it yet just know I'm going to pick it up today.

Now that is something I could be into depending on price. Let us know once you get details.

85250r313
06-13-2012, 10:16 AM
sorry guys, looks like xowner snatched the tecate parts. thanks! i am thinking about selling the 09 raffle 2oox . pm any interest please.

Swinger
06-13-2012, 10:56 AM
I have a tecate debore 200. It has a turbo veined crank and some sort of pvl flywheel on it. Dont know anything about it really just picked it up on a trade and wasnt what I thought it was. Also a 350x motor minus the head and I think there is some left case damage, good internals and other odds and ends. if anyone is interested I can check on certain things with these and let you know. Willing to trade for Tri-Z parts motor or plastics or maybe some 3rd gen R things or 1st gen tecate parts.

MIK6
06-13-2012, 11:01 AM
I have a tecate debore 200. It has a turbo veined crank and some sort of pvl flywheel on it.
PM me about the tecate motor. does it have spark? i might be interested in the pvl if you have everything w it.

THANKS
MIK6 / Mike

Chickengizzard
06-13-2012, 01:02 PM
Here's the pics I just took of the 70.

148358148359148360

He told me it has a new crankshaft and everything above the crankcase is all new.

What I saw in my once over is the throttle cable is broke.
Its been sitting for a while so will need the carb cleaned.
Crack in the back of the rear fender.

I don't know much about these little things so anyone thats interested ask and I'll check for you.

fabiodriven
06-13-2012, 01:13 PM
^^^Frame is bent on that ATC 70^^^

If anybody has a set of front brake shoes for an SX I'll give you cash for them. Thank you.

Big Mike
06-13-2012, 01:15 PM
Here's the pics I just took of the 70.

148358148359148360

He told me it has a new crankshaft and everything above the crankcase is all new.

What I saw in my once over is the throttle cable is broke.
Its been sitting for a while so will need the carb cleaned.
Crack in the back of the rear fender.

I don't know much about these little things so anyone thats interested ask and I'll check for you.

Did he give you a price he is looking to get for it?

atctim
06-13-2012, 01:32 PM
I-Trike, Curt - I'll take that 250R Bearing Carrier - please hold for me.

Chickengizzard
06-13-2012, 01:47 PM
He said he wants to get 500 out of it because thats what he had to put into the motor, but Fabiodriven said the frames bent so I'll see if thats his bottom dollar.

thestud25
06-13-2012, 02:41 PM
Alright, I have tons of gear, but I am not going to list it all.

I have 3 Moose Racing Gear bags. They sell for $140-160 new. These are Like new condition $80 a bag.
I have child riding gear. Alpine Boots size 9 and 10. $50 a pair. No pic, but they are pretty decent.
Thor 60-100LB chest protector. $40
Adult Thor Chest protector. I weigh about 210 and wear large-XL shirts. $40
KBC adult XL helmet $60

I have many other items. Goggles, kids and womens riding clothing, etc. If I don't have it listed it does not hurt to ask.

Chickengizzard
06-13-2012, 03:02 PM
He said no less than 400.

captainweezy
06-13-2012, 03:02 PM
It looks like I'm going to have one big ol load. Trikes just keep popping up. I'm going to do my best to bring as much as possible. Picked up an 85 big red with title yesterday, getting a load of 70's/ parts this weekend along with an 84 200s. I am going to try to camp the same area as last year which is on top of the hill by the pond. Will have a red Chevrolet pulling a white enclosed trailer. 85 big red runs great and everything works. The black rims with bear claw tires will be for sale at trike fest also. They were just put on there for the looks. Seat does have a couple small holes that are hard to see because of black tape. Needs grips and the front tire leaks down so I would venture to say it is the bead seal. The front tire is new, rears are 35%ish.

Swinger
06-13-2012, 03:33 PM
I have a set of sand star paddle tires on polished STI rims that I bought off of Ceasar on here and never used them. I am trying to free up some breathing room to make it to TF so shoot me an offer. Tires dont seem to ever be used. I also got a 350X tank that I will give away. Looks rough on the outside but inside isnt bad and no leaks. I also have a straight rear axle for a yamaha ytm 200E shaft drive. Make offers on anything!

tecat-z
06-13-2012, 04:45 PM
Kiser, sounds good. Got your name on them. I'll be arriving sometime Wed evening around dinner. Anyone else need some of my stuff? Hate to drag it back home ya know....

Cylinder cores sold:
Rear tires sold:

Everything else up for grabs pictures can be viewed in earlier post if interested. Thanks

TecateDan
06-13-2012, 05:12 PM
I have an 83 KX250 Jug for an 84-85 tecate. The jug was re-nicked not that long ago and it looks MINT. Also have the piston that goes with it. Think I paid 250 for it and only ran it about 10 hours so I'm looking ot get 250 for it. Also have 2" plastic wheel spacers for 4x156 in good shape.

kiser
06-13-2012, 06:14 PM
Thanks tacat-z! We will be there thursday about noon-ish. Ill have cash in hand for you.

Itrike
06-13-2012, 09:15 PM
I-Trike, Curt - I'll take that 250R Bearing Carrier - please hold for me.

you got! I'm in the market for some 18" rear tires , with or with out rims if any one has some for sale trade. If with rims i need 4 on 110 pattern. Ideally for 8" rims

kiser
06-13-2012, 09:27 PM
I am selling 8 new, never mounted Venom Racing-2 Vee Rubber tires. They are 21x7-10. Would be great if you are doing the 10in wheel swap on the front of your trike. They are 40 bucks a tire or trade for ???? I am looking for Yamaha BW 200 parts if anybody has any. Thanks

MRSOUND
06-13-2012, 09:45 PM
Here's my offerings:
225 dx rear fender, not busted up. typical scratches/gauges but will make a great rider piece - $40
225 dx/dr seat....separating at the corners - $40
NOS Front hub & brake panel(both obsolete) for KLT 110 or KLT 200...Perfect condition - $150 for pair
KLT 110 mud flaps...solid has some paint on them from PO $45 for the pair
85 250es motor....running when I pulled it some valve tap and kicker on it's way out was not smoking $100
Also have misc. parts left from 85 250es and 84 225 dx PM for inquires

148387148388148386148389148382148383148384148385

Greenthumb
06-14-2012, 06:04 PM
How much for the rear fender only?

Greenthumb
06-14-2012, 06:07 PM
How much for the air cooled fender?

Rear fender has no cracks, has some deeper scratches but no cracks. The seat is pretty nice with a few stains and one hole up in the right front corner. Tank is mint inside and really nice paint but has some chips from shelf life. Some one did a shitty job touching them up.

Guys if your interested in these make offer I have no air cooled R Need them gone. But im not gonna give these away .

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyODktMjAxMjA1MTYtMjAyNy5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTAtMjAxMjA1MTYtMjAyNy5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTEtMjAxMjA1MTYtMjAyOC5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTItMjAxMjA1MTYtMjA1NS5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTMtMjAxMjA1MTYtMjA1Ni5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAyOTQtMjAxMjA1MTYtMjA1Ni5qcGc.jpg

Xowner
06-14-2012, 07:08 PM
100 bucks for just the fender.

Bryan Raffa
06-15-2012, 07:06 AM
I got a complete 85 200x front end,, fork boots axle and all $100

Tri Z power valve top end with clutch cover.. $150

atctim
06-15-2012, 08:30 AM
I am in need of a 350X CDI - if anyone has one they can part with, please bring it and look me up. Will pay up to $40 for one.

Swinger
06-15-2012, 10:17 AM
PM sent about the CDI Tim

Flossyb20
06-15-2012, 04:05 PM
I got a complete 85 200x front end,, fork boots axle and all $100


triples as well? If so...I'm your man with the $$...we'll be at TF Wed. night (probably late)...I'll come find you...asuming you'll be up up at the top of the hill again.

Bryan Raffa
06-15-2012, 07:16 PM
triples as well? If so...I'm your man with the $$...we'll be at TF Wed. night (probably late)...I'll come find you...asuming you'll be up up at the top of the hill again.

yes tripples axle, collars.. nut, bolts, fork boots ect ..you got em..!! Yes on Da Hill!

Bryan Raffa
06-15-2012, 07:58 PM
Gonna cut this 85 special edition loose for $400! new plated axle, new rear bearings , new front bearings, all new cables ,new brake pads,front and rear rack, gun holder , stock and superflow pipe...TONS!!!!!!!!! new top end, 10:1 wiesco.. fresh bore... ..Xtra tub of parts...new bars new grips....yama line headlight guard.. ect..


the bad news 4TH GEAR IS TOAST!!! FIRM $400! still run good 1st ------3rd! DR REVERSE!!! <<<< L@@K HERE>>>> LOL:D

Gag_Halfront
06-15-2012, 08:31 PM
OMG, Raffa! Somebody is gonna get _REALLY_ lucky! I wish I had the money right now. That bad boy would sit right next to the battle trike. :-D

Bryan Raffa
06-15-2012, 08:34 PM
OMG, Raffa! Somebody is gonna get _REALLY_ lucky! I wish I had the money right now. That bad boy would sit right next to the battle trike. :-D

ya i know but i need a quad to plow my track......... everything i have for this bike goes with it.. 4 100 tri z hubs and rims... are on it... have stcok hubs! ect!

Billy Golightly
06-15-2012, 09:34 PM
Does anyone have a water cooled 250R FMF pipe that isn't beat to hell? Rust OK, minimal dents requested. I just realized working on mine that the pipe is totally trailprotrailprotrailprotrailprotrailprotrailpro up from my last wreck at Hernando. The whole bottom of it is flattened and its twisted by where it wraps around the frame at the exhaust port so much its almost pinched shut. Explains why it wasn't running very well.


I got an IMS 4 gallon gas tank for the water cooled R's and probably some other misc. junk I'm gonna throw in there.

smvorndran
06-15-2012, 09:47 PM
I'm planning on bringing an 86 350X frame that needs blasted & coated, 85 350X swinger, 1st & 2nd gen 200X bottom ends, an 85 350X that I rebuilt, have $1800 in receipts, just needs plastics & a few minor things to be excellent, an 87 200X that runs & rides, but may smoke, a few axles, and anything else ATC related I can find. The machines will be ridden most of the day Saturday, then I would like to move them in the evening. I'll be in a white & green crew cab Ford with a car trailer, probably down near the pond. Text me at 260318 three eight three eight if interested in some stuff. Can't wait to ride there again and meet some more of you guys.

smvorndran

mollie8000
06-15-2012, 10:23 PM
may bring 84250r tank,fenders etc 81250r carb,350x fenders,autox bottom if intrested

jeswinehart
06-15-2012, 10:49 PM
This will be posted on the side of my white Ford van also, on top of AlkyHill
(on your left as you enter main camping area)
TrikeFest Specials ~ reproduction parts
84 thru 87 Tecate intake boots @ 45 dollars each.
84 thru 87 Tecate uni trak frame covers @ 5 dollars a pair.
84 thru 87 Tecate flywheel exchange (you bring me 4 good magnets) @ 35 dollars.
84/85 Tecate front chain sliders @ 25 dollars each.
86/87 Tecate front (top + bottom) chain sliders @ 15 dollars a set.
86/87 Tecate coolant over flow bottles @ 60 dollars.

*86/87 UFO number plates (no numbers but will provide 4 zip ties) @ 25 each. (note *)
*87 Tecate specific handle bar clamp covers @ 10 dollars a set (note *)
86/87 KIPS emblems ~ talk to me :)
*84 thru 87 kick start lever/shifter lever @ 2 dollars each (note*).
83/84 Honda 250R front chain slider @ 25 dollars each.
Yamaha Tri-Z 85 thru 86 3 modle years front chain slider 15 dollars.
86 Yamaha coolant over flow bottle @ 45 dollars.
86/87 350X-200X steering stop cover @ 5 dollars.
350X/250R head light straps @ 5 dollars each.

AND, C.O.A.'s for the stock pile of 3WheeLerWorLD decals I will have on hand available ~ PLUS ~ a little something NEW, in so far as "Support our own" Trikefest attendees ONLY tickets <<< speacial NOTE THIS >>> ***

Spiritual and/or financial advice, as always NO charge.

Now, about those *** notes. All designate a universal fit for many trikes and yes, you can test for fitment before buying.

*** Special noted this *** this is THEE item that will help deffer cost associated with Trophies, port-a- john's and several other items related to putting on a heck of a nice show.
Only available for TrikeFest2012 attendee's (support our own)

Being allowed to be part of the TrikeFest planning committees procurement + recruitment, if you would like to help out in a event/area you will not be participating in, please come see me/let me know ~ it really IS a lot of fun to work the behind the scenes actions.

Thanks folks, john

kiser
06-16-2012, 09:09 AM
I have a all original and very nice 84 Honda 200m that I would like to sell. The only things not factory is the choke cable, battery and airfilter. The tank is mint! The rear fenders have light scuffs but nothing deep or cracked. The top of the tool box lid has a line scuffed on it from being opened. It still has the factory tires on it. The only reason im selling it is I cant bring myself to ride it because its to nice! Im asking 1000 OBO If somebody is seriously interested in it I can bring it to TF. If no interest its staying home because the carb needs cleaned and a new battery from sitting whitch is why id like to sell it. It just sits! I would be interested in trading it for a Yamaha Big Wheel, complete or parts. I dont care what size 80 or 200cc. If you have any questions or would like to see a pic of it call or txt me at 740-502-2223 Thanks!

Bryan Raffa
06-16-2012, 09:22 AM
DR SOLD TO Gag_Halfront.. thanks!!!!!!!!!!!!!!!!!

Howdy
06-16-2012, 10:09 AM
Updating my list of stuff I can bring:
I have the 1973 us90 I can bring if there is any interest. Asking $225 ( price is negotable ). http://www.3wheelerworld.com/showthread.php/144296-For-Sale-for-a-friend-1973-US90?highlight=US90

I have a Commuter 340 that needs fixed / put together asking $175 with the extra rear end, $125 without the rear end. I know very minimal about it.

I also have some 300ex parts some listed here: http://www.3wheelerworld.com/showthread.php/143509-For-Sale-Tires-some-85-250es-250sx-parts-and-96-300ex-parts


I am also taking request for parts for 90's, 110's, 125m's, 185 185s 200 200e, 200es, 83-85 200x, 250sx, 250es, 84 Tecate, Yam 200, Yam 125, Yam 175, Yamahauler, Yam 225, ect. I have very limited Plastic for the Honda's, none for the Tecate, but I have quite a few rear Fenders for the Yamaha's. Send me a PM and I will try to check and pull the parts I have.

I will have the 86 125m at Haspin. Runs good but smokes a little ( needs rings and or vavle seals ). Asking????

I might have a P3 for sale at Haspin as well. Talk to me there.
Howdy

Tri-ZNate
06-16-2012, 09:46 PM
I'm bringing my tri-z sprock cool head to sell with what I believe is a big bore dome. No oring for head to cylinder mounting surface. Has maybe 2 hours of riding on it. Make me an offer

Also have a z boost bottle made by sblt500r. Make offer

Bryan Raffa
06-17-2012, 10:40 AM
Cool head sold .. thanks Nate...

MIK6
06-17-2012, 09:41 PM
Hey tecate guys... i must not have had my flywheel on rite when i put the new ricky stator on.. i broke the keyway in 2the pieces.. anyone have an extra to bring to trikefest??

MIK6/ Mike

smvorndran
06-17-2012, 09:46 PM
I'm in need of 8 tapered lug nuts to fit a 200X. I have standard lug nuts as someone had Douglas rims on it, and I'm going back to the stock style. Even my 400EX lug nuts work, but Honda wants $5 a piece for them. If anybody has a set, I'll be down Saturday and could really use them. Hit me up (260)318-3838 text

Thanks,
smvorndran

tecat-z
06-17-2012, 10:08 PM
Mike, i'll bring an extra key.

Gag_Halfront
06-17-2012, 10:21 PM
Tecat-z, do you still think you could hook me up with that circlip that goes inside the rear master on my T3? Remember how it came apart at Bundy Hill? Please let me know.

MIK6
06-17-2012, 10:24 PM
Mike, i'll bring an extra key.

THANKS BROTHER!! Im going to try to find one in the morn, but who knows.. lol

Thanks
MIK6/ Mike

just ben
06-17-2012, 10:35 PM
THANKS BROTHER!! Im going to try to find one in the morn, but who knows.. lol

Thanks
MIK6/ MikeI hope the measurements help. if you need them in inches just give me a shout.

Gag_Halfront
06-18-2012, 12:09 AM
heh... I found a key in my truck today. Not sure if it's for the T3 or the 200x. I didn't even know I had it. w00t! Free parts! It's like finding five bucks in the pocket of the coat you haven't worn since last winter.

Howdy
06-18-2012, 12:34 AM
I'm in need of 8 tapered lug nuts to fit a 200X. I have standard lug nuts as someone had Douglas rims on it, and I'm going back to the stock style. Even my 400EX lug nuts work, but Honda wants $5 a piece for them. If anybody has a set, I'll be down Saturday and could really use them. Hit me up (260)318-3838 text

Thanks,
smvorndran

Hit me up when you get there. I will be on alky hill near Swineheart.
Howdy

matt3x
06-18-2012, 01:42 AM
I have an 83 to 85 200x gas tank with both scoops and also a maier rear fender and stock black seat with no cracks in the fender no rips in the seat. Looking for $50 for the tank and $125 for the fender and seat together. Will bring both to trikefest. Txt or pm of interested. Also pics available upon request.

Matt
7167997870

atctim
06-18-2012, 08:34 AM
I'm bringing a GOKI complete starter kit for an ATC200 / 200S. It is the perfect addition to any Auto-X. Used, but good working condition. $100 Firm. Battery Box is currently built for use on an Auto-X.

Flossyb20
06-18-2012, 09:05 AM
I'm bringing a GOKI complete starter kit for an ATC200 / 200S. It is the perfect addition to any Auto-X. Used, but good working condition. $100 Firm. Battery Box is currently built for use on an Auto-X.

Where are you going to be camping tim...I'd like to come by and take a look at it.

atctim
06-18-2012, 09:12 AM
I plan on camping at the Pavilion by the Big MX track. Look for a white Dodge conversion van pulling all aluminum trailer - or look for the good looking fellow on the TRX450 Conversion (Withe/red/black). I bought it new - had it on the Ex-Wife's bike for a couple years, and it got taken off by the new owner of the Auto-X.

smvorndran
06-18-2012, 12:20 PM
Hit me up when you get there. I will be on alky hill near Swineheart.
Howdy

Thanks Howdy. You sold the Trikefest shirts last year, didn't you? I think you hooked me up with a bunch of 3ww stickers. I'll see you there.

Thanks,
smvorndran

Xowner
06-18-2012, 01:07 PM
Brand new hondaline 200x front headlight grill guards 35 bucks a piece i have 3 of them. they are the bigger black ones that cover the glass, and are to be used without a headlight guard they replace the bezel

Tri-ZNate
06-18-2012, 09:44 PM
I'm in need of a triz swingarm skid plate. If you have one please bring it

blue27
06-18-2012, 10:31 PM
just posted some NOS 200es foot boards in the classifieds and I have an 81 ATC185 trunk

hadar
06-19-2012, 12:16 PM
We are looking for a nice 85 R rear shock that is not blown out. Don't want to pay too much for it as well.

PM me if you have one and can bring it to TF.

Also still looking for air R dg head.

ATC-Eric
06-19-2012, 12:46 PM
Does anyone want a 200es complete running engine? Get at me!

bandito90
06-19-2012, 02:03 PM
Looking for a yt60 cylinder core and head.

Xowner
06-19-2012, 05:43 PM
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzOTAtMjAxMjA2MTktMTUyMy5qcGc.jpg

Cheap see me at the house for a good deal

matt3x
06-20-2012, 12:55 AM
May need a front rack for a 250 big red if someone has one that's not all bent up

hippyplz
06-20-2012, 11:01 AM
I could use a good carb for a atc 90 and top motor mount for a 84 200x.

captainweezy
06-20-2012, 12:49 PM
I bet i have a carb but not sure about the 'good' part! Also will bring a 200x top motor mount. Cheap $5 should be fine. Eta is around 9 a.m. Thursday morning. Top of the hill by the pond. Will have about 12 diferent sets of fenders so im sure you will be able to spot me.

84 tecate guys you better come see me. I have a bunch of parts and they will be really cheap. a nice frame as well.

Also air cooled r guys I have a motor and a few other parts. I have a bunch of forks/triples as well

captainweezy
06-25-2012, 06:53 PM
Want to thank everybody that stopped by my pad to visit and meet me. Had a great time. If you bought something off me and i have not left feedback for you, send me a pm with a link to your feedback.

Bryan Raffa
06-25-2012, 07:23 PM
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzOTAtMjAxMjA2MTktMTUyMy5qcGc.jpg

Cheap see me at the house for a good deal


BHAHAHAHAHAHAHAHAhAhAhAHAHA! Thank you!!!! them baby's are GOLD!!!!!!