mykdee
06-28-2012, 01:27 AM
Just picked up a 1982 ATC70 for my daughter, started when I bought it tonight, now it wont start! Was looking at the wiring, looks pretty simple it has no headlight. At the the pull start cover there are 2 wires coming out, 1 is no longer hooked up, please tell me where those 2 wires go!! Need to get this running, its pissing me off! UPDATE I fixed the problem! Replaced the spark plug and spark plug boot, rewired the cut off switch, runs like a champ now!!
So my idea is to do a cheap restoration, more of preserve the condition of the bike as it sits now! Spent a couple hours today polishing out the paint, color sanded it actually, sanded of the rust on the motor, will repaint silver. I will replace the seat cover and plastics, but will try to keep as much as possible original! Like I said this was only an hour or two of cleaning up, still have a lot to do! But what do you guys think so far?
149706149708
149709149712149713149711149710
So my idea is to do a cheap restoration, more of preserve the condition of the bike as it sits now! Spent a couple hours today polishing out the paint, color sanded it actually, sanded of the rust on the motor, will repaint silver. I will replace the seat cover and plastics, but will try to keep as much as possible original! Like I said this was only an hour or two of cleaning up, still have a lot to do! But what do you guys think so far?
149706149708
149709149712149713149711149710