PDA

View Full Version : What rims for 185 s



jeigsk
07-17-2012, 10:13 PM
What rims will work if have a 1980 185 s Honda. Make and years

jeigsk
07-18-2012, 08:05 PM
No ones wants to help

shortline10
07-18-2012, 08:16 PM
Its an odd ball size 4x155mm I believe so stock is best unless you change the rear hubs to a atc200x and use the common 4x110mm and the rim choice is simple and vast LOL .

4x4van
07-18-2012, 09:18 PM
No ones wants to helpCorrect...no one wants to help since your other post had such terrible spelling, grammer, punctuation...and then you bad-mouthed those who were trying ro help, even though they couldn't understand anything you were saying.

You get what you give.

jb2wheels
07-18-2012, 10:51 PM
I bet you don't have a 1980 185s...

Assuming it's the big tire 185, it came with 9" diameter rims with a 4x150 bolt pattern. So, check out this chart for other 4x150 ATVs:
http://www.pureoffroad.com/ATV_Wheel_Bolt_Pattern_Guide.htm

Other options are to change your rear hubs like Shortline said - hubs from nearly every other Honda ATV ever made bolt on except 85+ 250R and 85+350x. But, you're stuck with the front hub.

jeigsk
07-19-2012, 01:05 AM
Correct...no one wants to help since your other post had such terrible spelling, grammer, punctuation...and then you bad-mouthed those who were trying ro help, even though they couldn't understand anything you were saying.
No no no they start. There no reason to be mean.they started first. I was looking for help and wanted to be smart a s s
You get what you give. no no they started it. There is no reason to be rude. If u do not understand then keep
mouth shut. That is way nicer then being big as hole. right

jeigsk
07-19-2012, 01:06 AM
I bet you don't have a 1980 185s...

Assuming it's the big tire 185, it came with 9" diameter rims with a 4x150 bolt pattern. So, check out this chart for other 4x150 ATVs:
http://www.pureoffroad.com/ATV_Wheel_Bolt_Pattern_Guide.htm

Other options are to change your rear hubs like Shortline said - hubs from nearly every other Honda ATV ever made bolt on except 85+ 250R and 85+350x. But, you're stuck with the front hub.it three bolt and has same tire size as my
200 x

jeigsk
07-19-2012, 01:10 AM
Rear hub I think might be wrong. The rim was split. It like dbl rim or something. In can touch the tube in side rim. But it air up . Have seen a rim like this.

jeigsk
07-19-2012, 01:14 AM
Rear hub I think might be wrong. The rim was split. It like dbl rim or something. In can touch the tube in side rim. But it air up . Have seen a rim like this. Ok. The bolt wher the wrong size. It was not bolt straight. But have two 185 so toke the one off it tell can get new hub at least.

jb2wheels
07-19-2012, 08:38 AM
Oh - interesting.

81 185s came with 3 bolt hubs and split rims. 3x100 bolt pattern like most Hondas up to that point. Either way, the 3 bolt hubs bolt right on the axle.

The rest of the answer is still the same. Without changing hubs, you're looking at ATC70,90,110,185s,FL250 and Maybe Tri-Moto and one or two old Suzukis.

jeigsk
07-19-2012, 06:15 PM
Oh - interesting.

81 185s came with 3 bolt hubs and split rims. 3x100 bolt pattern like most Hondas up to that point. Either way, the 3 bolt hubs bolt right on the axle.

The rest of the answer is still the same. Without changing hubs, you're looking at ATC70,90,110,185s,FL250 and Maybe Tri-Moto and one or two old Suzukis.not sure the year can not find tag on it. So u r saying.the hub should not permanent bolt but u just put bolt in and out

Keepah Rolln
07-19-2012, 06:58 PM
I just picked up a 1982 185 a few days ago. I'll take a look at the rims tomorrow. trailpro

hoosierlogger
07-19-2012, 08:13 PM
Correct...no one wants to help since your other post had such terrible spelling, grammer, punctuation...and then you bad-mouthed those who were trying ro help, even though they couldn't understand anything you were saying.

You get what you give.

I hate to rub it in, but I told him this was going to happen. LOL

jeigsk
07-19-2012, 09:57 PM
I hate to rub it in, but I told him this was going to happen. LOLWhat did tell me. You told me to get a tape measure

jeigsk
07-19-2012, 09:59 PM
I just picked up a 1982 185 a few days ago. I'll take a look at the rims tomorrow. trailprosorry about this other people are messing up this forum. They like to do that . Thank you for some real help.

briano
07-19-2012, 10:31 PM
Seriously stop and read your posts. Who in the he'll is supposed to understand the things that you type? Slow down and think it out before you start pecking away on the old keyboard.

jeigsk
07-20-2012, 01:20 AM
Seriously stop and read your posts. Who in the he'll is supposed to understand the things that you type? Slow down and think it out before you start pecking away on the old keyboard.Ok no keyboard touch sorry I pad

hoosierlogger
07-20-2012, 05:15 AM
What did tell me. You told me to get a tape measure

I told you that no one was going to want to help you.

jeigsk
07-20-2012, 01:26 PM
I told you that no one was going to want to help you.What r u talking about
People r helping

hoosierlogger
07-20-2012, 02:38 PM
What r u talking about
People r helping

Yeah but it is people that probably didnt read the other thread.

jeigsk
07-20-2012, 07:45 PM
Yeah but it is people that probably didnt read the other thread.U blowing this way out the water. Don't u have something else to do beside miss my forums. You are reason no want to help. Not because of what said. They do not want you to harassing them. I have gotten a lot message helping because u will not stay off my page. So thank for help it still coming in.

4x4van
07-21-2012, 01:35 PM
Wow. iPad, smartphone, keyboard...no matter what you are using, slow down and take your time. Your grammer, spelling, and punctuation is horrid. Try actually reading back to yourself any one of your posts. Does it make much sense? Is that the way you talk?

People have a hard time figuring out just exactly what you really want or need. If you slow down and communicate clearly, you'll get much more accurate help. Just a suggestion.