New to the forum and new to a honda atc 200 three wheeler

[molczak714]

Hey guys i just boutht a honda atc 200 three wheeler. I have a question on how to remove the back wheels. The tires are shot cracked ect..... and i just bought 2 new ones for 20 bucks. Walmart will put new tires on for me on the rim for 5 bucks a tire but i dont exactly know how to remove them. One big nut there and 4 small seem like lug nuts. What do i actually have to remove to get the wheels off a picture would be great. Thanks.

[ATC-Eric]

Welcome aboard. You want to remove the 4 small lugs, and the wheels will come right off. Hows the rest of the machine? Have any pictures?

Once again welcome.

[G_Nuts]

You can take the rim and tire off by loosening/removing the four smaller nuts. You don't need to take off the big one unless you are changing the hub itself.

Hope this helps.

[molczak714]

Alright cool thanks ill take some pictures in a bit and send them right up

[molczak714]

oh yeah and the tires on there right now are 22x11-00-8 and the tires i bought are 22x11-00-9 will they fit on that rim?

Here is the picture

152229

[G_Nuts]

Not sure on that one.

[molczak714]

the 00-8 thats the hight of the tire? 8 inch tire?

[jb2wheels]

oh yeah and the tires on there right now are 22x11-00-8 and the tires i bought are 22x11-00-9 will they fit on that rim?


no

your rims are 8". The tires you bought are for a 9" rim.

What is that - 83 or 84 ATC200s? Good machine - it'll be a lot of fun.

[ironload]

from the sound of it you have 8 inch rims on your wheeler and you bought tires that fit 9 inch rims, so i dont think they will work.

[molczak714]

its a 84, that really sucks well i didnt buy them yet i was going to go today and pick them up

[molczak714]

but i do have a extra set that are 25-12-009 will the 22-11-00-9 fit on that

[remsandpets]

His rims are 8 inch and he needs 8 inch tires or rims that are 9 inch. That would require changing the hubs as well I believe.

[molczak714]

i see so the 25-12-9 require dirrerent hubs? then whats on there now

[remsandpets]

9 inch rims are a different bolt pattern than the 8 inch I believe. I have 25x13-9 on my 83 200 and the hubs that were on my replacement axle were for a 185 and would not fit my 9 inch rims.

[molczak714]

9 inch rims are a different bolt pattern than the 8 inch I believe. I have 25x13-9 on my 83 200 and the hubs that were on my replacement axle were for a 185 and would not fit my 9 inch rims.

Hi I noticed that the 9 inch came with hubs in them already mounted so I guess I lucked out

[remsandpets]

Just PLEASE remember the cotter pin when you install the hub nut. I know I'm just stating the obvious. I'm not assuming anything mind you.

[molczak714]

Thanks for the heads up ill remember to put it in