just got a 84 atc 200s (in a box). what is the most basic way to wire?

[rynb15]

Got the bike really cheap. Most of it is in a box. Needs a few parts and just put back together. Anyway i was wondering if i could wire it up a lot more basic. Like an old xr dirtbike. I dont have the head light, or a key. I would just want a kill switch on the bars. Is this possible? any instructions on how to wire this up? I do have the wiring harness and the coil. I just want to keep it simple. Thanks

[dustrunner]

honda made it pretty simple. you should have a kill switch so if you have a good wiring harness get a wiring diagram off the net or here and hook it up. the stator wires coming out of the left pull cord side of the engine will have plug ins . put the kill switch on the handle bar and hook it up and run the harnes on the frame towards the back of the atc and it will all work out... good luck 200s didnt have a key...

[rynb15]

cool, thanks man. Are there any good write ups on hooking up the pulse generator?

[MonroeMike]

http://kb0nly.lgnas.com/index.php?dir=ATC200S%2F&download=ATC200S+84-86+Shop+Manual.pdf

[rynb15]

thanks guys. I think i got the wiring all put back together. Now the hunt to find more parts. Thanks

[dustrunner]

glad it's working out for ya. keep on hunting....