PDA

View Full Version : The Teardown Continues



Kasper1974
09-29-2012, 07:12 PM
So I got some more free time today and decided to finish tearing down the 250R. Got it down to bear frame. I noticed when I went to remove the swingarm and axle that it didnt look like a stock axle to me, so after getting it all broke down (had to use a 4 ton press to get the axle out of the bearing retainer) I cleaned some of the paint and crud of the axle and discovered it was a Durablue. Not bad for a free trike, first the Selvy's exhaust and TRD ported jug and now the Dureblue axle, I think I made out like a bandit on this one! Got bored and was playing with the polisher on the axle.............pics below.