1985 200m

[lafermedavid]

Hi all,Im new to this site,names dave,I recently aquired a honda 200 m ,tires all dry rotted ,purchased new tires ebay,new carb 9$,(new chain and sprocket 30$ waiting for arival to install) started right up after not having run for a while.Have it on stands and all gears shift smoothly,lights all work front and rear.So far so good.Is it that difficult to find plastic for the 200m mine I have all fiberglassed like road warrior.chassie is very clean just plastic is rough.Thanks for reading dave

[remsandpets]

Welcome to the site Dave.

[lafermedavid]

thankyou for greeting,looks like a cool site,the one member post original manuals that is awesome

[sp8twn]

Welcome abord Dave!!!!:TrikesOwn

[lafermedavid]

I need to change oil,saw on another post about cleaning screen.I would have never known that.Thankyou.Applying front rack over fender that I bought at a farm auction for next to nothing,came off a big red.Do you think it would be ok to use the fork bolts to mount light guage steel to receive this rack or should I just weld steel to fork frame to receive rack?any suggestions thankyou

[lafermedavid]

hey I didnot know to start a new post for ? or stay with original.I guess thats why they start us on this beginner course.My ? is, is it better to use synthetic oil for my first oil change or .What would others suggest? thankyou dave

[remsandpets]

I don't know the benifits of the synthetics but defiantly use motorcycle oil for wet clutches. IF the M is a wet clutch trike. An oil change will never hurt. Be careful pulling the screen. Its thin wire but stiff enough to grab lightly with needlenose pliers to get out. Or a stick magnet. I assume they are steel. Have fun with the trike and again welcome to.the forum.