Alberta250r
10-08-2012, 06:10 PM
The clutch wont engage at all, dosent feel like there is much tension on the clutch handle. I originally thought it was the cable because it was all frayed. so i put a new cable on it, same thing. Next i thought it might be the spring on top of where the clutch shaft goes into the case, I hooked a carberator spring to it and to the frame of the bike. lots of tension in the handle now but that's not the problem at all it seems. Ill start the bike up pull the handle in and pop it in gear and stall rate out, its like it dosent have any effect on the clutch itself. anybody have any ideas at all, my ridding season is gonna be cut off soon the snow is coming!