rear axle and bearing romoveal 200ES help

[nathan lovern]

Hey,
Im needing to replace the bearings in my 1984 200ES andi wanted to know a few things, how do i remove the colar up against the brake drum on the axle , do i have to take cases apart to knock the bearings out, and what holds the axel in place? Ive never done this before and dont want to mess anything up :-( I have the bearings ordered from ebay
Any advice will help. Thanks so muchhh
Nathan Lovern,Va

[nathan lovern]

The PDF shows a bearing built into the brake cover, is that the one i need to replace? or the one in the axel houseing?

[nathan lovern]

well i now know there is NO bearing left in my break drum, only the race frozen onto the axel next to the brake hub, :-( i managed to move the axel about 1/4 an inch out to the left thats about it. The bearing colar come off and the brake hub came off.
Is the axel free to knock out now???

[sp8twn]

Maybe this could help!!? http://www.bikebandit.com/houseofmotorcycles/1984-honda-atc200es/o/m1891#sch10870

[kb0nly]

Get the manual from my server, link in my sig area below...

It shows step by step how to do this repair.