PDA

View Full Version : 1984 Atc 110 engine drop



cjkokes
10-21-2012, 01:51 AM
I need to rebuild the engine so I removed all the mounting bolts but the top rear one won't come out. I got the nut off but the bolt won't come out even with a hammer. Am I missing something here.

tri again
10-21-2012, 09:02 AM
Have you tried spinning the bolt while tapping it out?
Will the bolt turn at all?
Keep the nut on but loose so you don't bugger up the threads.
Liquid wrench drooled down the bolt shaft?

The search key is also my favorite way to get lots of good info.

also try clicking on the following words

service manual

Can't imagine there's any funny lock nut on there but I certainly don't
know for sure.