PDA

View Full Version : New guy with ATC110...the carb



Wanganuilad
11-13-2012, 09:46 PM
Hi Guys,
I had a nice ATC200 for years and now the proud owner of a little ATC110.
I need to sort the carb out, leaking from the tap, gaskets gone hard etc.
I looked at kits but don't feel very confident so thought about a replacement carb
I found these two http://www.ebay.com/itm/360507518103?item=360507518103&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr
http://www.ebay.com/itm/230679561636?item=230679561636&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr
They look good but the issue is postage to New Zealand which would more than double the price !
I wonder if there are better options? postage from the US is ridiculous.
Any Australians about with another plan ?
cheers
Pete

Cujo909
11-21-2012, 01:34 PM
I know you said you don't feel confident but.... Moose rebuild kit was 15 bucks. I'm a better visual learner myself, so if I'm uneasy I you tube it first and watch someone else do it, it's really not that bad. Worst case is your out 15 bucks. You can Pause and watch as you go. That's my thought to ya.

dustrunner
11-22-2012, 10:34 AM
ya, i agree with cujo take a few picsas u go if needed and clean everything really good and re-assemble.. not hard at all...

kb0nly
11-22-2012, 11:35 AM
These are some of the easiest carb's you will have a chance to work on. Tear it apart, clean every part thoroughly, you might have to get some carb dip to soak it if its really dirty, blow out all the carb passages with carb cleaner and compressed air. If you don't have an air compressor get a couple cans of compressed air like you use for cleaning electronics, its better than nothing. Just get everything clean clean clean. Remove the jets, run some small wire through all the holes, get some pipe cleaners for larger openings, etc. Cleanliness is next to runingness... LOL