1983 110 atc no fire

[fredw]

help ! i cannot figure out why i have no fire at spark plug , new plug .new coil, new cdi box . no broke wires , impulse at cdi breaker . 1volt at alternator while pulling rope . any ideas?

[Cornholio]

spark plug wire... And, you shouldnt have fire, you should have spark. Depends on how you are testing the plug, set it on the engine then pull it over, make sure the plug is grounding out on something

[fredw]

thanks but have done that and tested with meter ,still no fire . is there an inline fuse somewhere? am i missing something?

[Cornholio]

make sure that your switch and connections to ground are good. to test if the swtich is bad, unplug the 2 wires from the switch, then plug the one from the coil directly to the stator wire i believe...