PDA

View Full Version : Bill M...Look at me...im on here ,bro



kevink
02-18-2013, 11:23 PM
Its me from NJ. Im just trying to throw up a few posts so i can get my chance at seeing the classifieds. BTW the 85 TRi-z is sold. Now the search is on for green..As you would call it..Im trying to complete the trifecta....Talk to ya soon

whtcamaro
02-19-2013, 02:20 PM
Ha, me too.. Been a member since 06 and haven't posted since this rule was implemented. Now I have to catch up.

JasonB
02-19-2013, 06:54 PM
welcome! Now get to post whoring lol

3Queen
02-19-2013, 07:10 PM
Hi and Welcome to the site...

kevink
02-20-2013, 04:01 PM
Thanks guys. Ive been searching for a 86 tecate3. Anyone have any leads for me?

ezmoney1979
02-20-2013, 04:19 PM
Welcome to the site! And good luck finding an 86-7 Tecate, my favorite trike!

M.Pargiello
02-20-2013, 04:24 PM
163385

Welcome :)

kevink
02-20-2013, 05:07 PM
EZmoney. Do you have any parts for those year tecates. Just in case i come up w/one needing work

ezmoney1979
02-20-2013, 05:17 PM
EZmoney. Do you have any parts for those year tecates. Just in case i come up w/one needing work
I used to, but I have got rid of some stuff to members on here, then I got an 86 with a KX500 motor and have used up most of my extras. I only really have an extra motor and two front ends (tripples, hubs, rotors, but bent and rusty forks). Don't worry though, there are enough of us here to get you what you will need, however some of the parts don't come cheap! Good thing is, the plastic is still somewhat available, some OEM (get it while you still can) and some aftermarket.

davidvi
02-21-2013, 01:01 PM
welcome to site

kevink
03-05-2013, 11:27 PM
Thanks for the warm welcomes. I picked up a 86 T3 short track project last week and im going to pick up another 86 T3 project this friday. My question is: does the 86 kx250 cases work on the 86 kxt motor because i need a left side because of the famous chain damage done to it. Im quite sure it does because the motors are same serial #s but just wanted to ask. Also read the motor was a direct replace except for gearing but wanted to know about just swapping the motor half. Any help would be great...thanks guys