200s 200x swap ?

[corbo1]

Does it swap rite on? Which motor mounts do I use any other changes need to be done

[3wheelerfan1991]

I'm no expert, but i believe it will swap right in, but you need to rig something up for the rear brakes.

[CodyRosa]

I'm using my 200m motor (same motor as the 200s but with electric start, and the S has more acceleration) in my 200x. I'm using the 200x motor mounts but the 200s should work. I even had a 185s motor in my 200x to begin with. These are all DIRECT bolt ons.

Not sure what he means rig something up with the rear brakes? (assuming your putting a 200s into a 200x frame) You shouldn't have to rig anything. Only thing you'll have to rig(unless you have the 200x header, muffler) is a motor mount.. at least with mine I custom made one.

Good luck with the swap!

[mike m]

I did it a couple of years ago,still have the wheeler.the 185 200s motor will bolt right in,with stock mounts.i cant remember but i had to do something with the stator wires.I made a rear brake pedal out of an 250sx pedal had to die grind the center plastic a little to fit on the foot peg and make a linkage but it was farily easy to make.I could take a pic if it helps u but it's buried in my shed.

[Stephon_xr500]

The brake petal from a 350x bolts right on. On the 200x the petal mounts to the kick start, not an option if there is no kick start like the 200s 200m and 185s.