Got a tri z 250

[Harobikes1988]

So I took the plung and traded my 04 400ex for a 85 tri z 250. For the most part this thing is clean for a tri z around here. It needs a little tlc but it's all there does anyone know where I can get parts for this machine. I swapped the hubs and tires off the ex but when we took the original hubs off the left side threads were stripped so I am gonna try to rethread it for now to get me through the summer and this winter I plan to rebuild it from the ground up

[Just-Tri-It]

So I took the plung and traded my 04 400ex for a 85 tri z 250. For the most part this thing is clean for a tri z around here. It needs a little tlc but it's all there does anyone know where I can get parts for this machine. I swapped the hubs and tires off the ex but when we took the original hubs off the left side threads were stripped so I am gonna try to rethread it for now to get me through the summer and this winter I plan to rebuild it from the ground up

Ebay has a lot of parts. Sometimes Craigslist or Kijiji.

[tommerp]

I have a few odds and ends...mostly smalls... hmu if you are looking for something.

And gratz on the Z... You'll love it!! I know I do!

Tommer

[JasonB]

congrats on picking up a Z! throw some pictures of it up when you get time

[tbus93]

Really my buddy traded his 85 tri-z 250 for a 03 or 04 400 ex

[wisconsinite]

A banshee axle will fit if you need a new one.

[beadle]

this link is going to be your best friend i just rebuilt my z over the winter very helpfull
http://www.3wheelerworld.com/showthread.php/16277-parts-that-inter-change-with-TRI-Z-250

[NeverLift]

You maid a good choice

I picked up my Tri-Z about 5 years back. Did a ground up rebuild on it and have loved every second of it. I bought almost everything on Ebay. Also fallowed the Yamaha Wrench Report that you can find on this site about engine work. It runs awesome then i found a 86 6 speed for it and the differenct was night and day it is worth every penny to find one. I went from loosing to my buddys built Raptor by 5-6 bike lengths to beating him by 5-6 with only installing the 6 speed. I am currently in the process of puting a 85 yz250 powervalve cylinder, ignition, and flywheel on it. i should have it together in a couple weeks. I Can't Wait! 168649168650