LED light on my Big Red 250

[marc250Red]

167509167504167505167506Hi, I came to bought some led light and i put it under my red, it look pretty nice and it gives a cool look...anyway i just wanna share this with you guys ...i think that its worth the price, i bought them for cheap on ebay and its awesome. The only think i had to say about them negative, its that the wire that is on is realy thin but , for the price i paid, its kinda normal...anyway heres some pics if you wanna see what 10 dollars led can do ...thanks for reading im newbie in this forum.

[kb0nly]

Neat... I love LED lighting, i have a couple rooms of my house with nothing but LED lighting, and my kitchen i replaced four flourescent tubes with two LED tubes, just as bright with a quarter of the power used. Can't beat LED's...

[218honda110]

Love It!! i need to do it to mine.

[Worden18]

Cool idea. Looks good :)

[ps2fixer]

Pretty neat setup, just one comment, if you ride it hard at all, you might want to relocate the led strips somewhere else, the first time you bottom out will rip the leds right off.

I had a similar plan with mine, except for a ground effects light, I was going to change the main head light to led :).

[marc250Red]

Thanks everyone and, ps2fixer, i know that i had to stay alert of where i roll but i have a fourtrax to go on rought trail youknow i kinda try to preserve my big red since i restored it hahaha

[ps2fixer]

Thanks everyone and, ps2fixer, i know that i had to stay alert of where i roll but i have a fourtrax to go on rought trail youknow i kinda try to preserve my big red since i restored it hahaha

Hehe, understandable, I take mine everywhere, so I bottom it out at least once a week :D.

[shemrahboo]

hahaha, that is sick bro. I want yellow ones around my jump offs

[Big G]

Cool idea! How did you wire it in?

[ncorry]

Cool idea! How did you wire it in?
X2. I have 15 or 18 watt CREE LED sets on my 4 wheelers and they are flat out impressive. Don't even bother with the 35 watt (per bulb) headlights anymore. However, the wiring on the 4 wheelers and other vehicles I've installed them with is a lot more straight forward. Have one on the way for the 200ES, and am not so sure about how to wire it into that wiring junction in the headlight.

[ps2fixer]

X2. I have 15 or 18 watt CREE LED sets on my 4 wheelers and they are flat out impressive. Don't even bother with the 35 watt (per bulb) headlights anymore. However, the wiring on the 4 wheelers and other vehicles I've installed them with is a lot more straight forward. Have one on the way for the 200ES, and am not so sure about how to wire it into that wiring junction in the headlight.

I would say run a new set of wires off the battery clamps and add a standard 12v plug, like all cars have and run the lights off that, and any thing else that is 12v you want :). Don't forget to fuse the wires as close as possible to the battery, positive side normally, and some sort of switch to turn them on/off and make sure the switch is rated for at least 3 amp @ 12v.

[sstark82]

looks like my 250sx will be getting that treatment in the future!! Cool Idea and welcome to 3wheelerworld!

[xela456]

im with it on the LEDs they are awesome. i replaced my OEM tail lights with super bright LED trailer lights and they are bright as hell!
check it out

[marc250Red]

Pretty cool xela456 and for me, i wired them directly to my tail light

[xela456]

yeah they fit directly in the slots and with the rubber boot that they come with it hides the corners pretty well.
soldered on some weather pack spade connectors and i'm in business!

[Fink]

big pimpin