View Full Version : wheel nut size / tire fell off !
steck
04-19-2013, 05:27 PM
anyone know the wheel (axel) nut size for the Honda ATC 110/125..
the wheels came off.. so to speak..on its last ride..
Big G
04-22-2013, 02:16 PM
That's why it's important to make sure the cotter pin's in! At least no one was injured :p
Sorry, don't know the nut size off hand.
barnett468
04-23-2013, 10:40 AM
anyone know the wheel (axel) nut size for the Honda ATC 110/125..
the wheels came off.. so to speak..on its last ride..
Hello
ATC 125 is front 12 mm X 1.75 mm thread, rear is 14 mm X either 1.50 mm or 1.75 mm thread castle nuts available at honda shop or industrial hardware store not at home depot..
You need to list whether it's a 110 or 125 next time, it can not be both.
steck
04-27-2013, 01:02 AM
Hello
ATC 125 is front 12 mm X 1.75 mm thread, rear is 14 mm X either 1.50 mm or 1.75 mm thread castle nuts available at honda shop or industrial hardware store not at home depot..
You need to list whether it's a 110 or 125 next time, it can not be both.
hey thx. i always thought the 110 was identical to the 125m for the most part.
yeah, i did some checking and came up with 14mm castle nut (1.5 fine thread). very hard to find around here..
i found some M14 nyloc nuts that i thought would work, but a buddy said 'no, you have to use a castle nut with washers, and the cotter pin..
barnett468
04-27-2013, 01:18 AM
Hello
hey thx. i always thought the 110 was identical to the 125m for the most part.
Yes but not everything so I think it’s best to say exactly what your bike is.
xxxxx
yeah, i did some checking and came up with 14mm castle nut (1.5 fine thread). very hard to find around here..
You don’t have an industrial hardware supply store I’m guessing.
xxxxx
i found some M14 nyloc nuts that i thought would work, but a buddy said 'no, you have to use a castle nut with washers, and the cotter pin.
You definitely need a thick hardened flat washer the nyloc will work but needs constant checking. It will not fall off like your other one. Torque axle properly.
Washer Item #1 and nut #13.
http://www.cmsnl.com/honda-atc125m-1985-usa_model7170/partslist/F++07.html#results
barnett468
04-27-2013, 01:23 AM
That link i gave you has those original parts available $2.50 each.
steck
04-27-2013, 06:39 PM
hey thx ! thats why i come on here !!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.