PDA

View Full Version : 200s stator


3_wheeler_king
05-22-2013, 08:56 AM
i have a 1985 honda 200s and the stator went bad i have no clue where to even look for one ive been searching the internet for about a week now and found nothing if someone could help it would be really appreciated
kb0nly
05-22-2013, 12:26 PM
Which coil you need, the alternator/stator coil or the ignition source coil? The ignition source coil is available new from DrATV

http://dratv.com/atcprstcocdi.html

There is also an all in one replacement available aftermarket..

http://www.ebay.com/itm/Electrosport-Industries-Stator-ESG060-for-Honda-ATC200S-1984-1986-/261035567380?pt=Motors_ATV_Parts_Accessories&hash=item3cc6eea914&vxp=mtr

There is a half dozen or so used ones available on eBay as well.
3_wheeler_king
05-22-2013, 01:26 PM
the coil that sends spark to the spark plug from the magneto i have no idea what its called
kb0nly
05-22-2013, 01:43 PM
Oh you mean the actual ignition coil that the plug wire is attached to?

Are you certain thats the problem? Because its pretty darn rare that they go bad, i have replaced one in like 20+ years of wrenching on trikes and bikes. Usually its the source coil down in the flywheel or the CDI unit that goes bad.

Did you take an ohm meter and test the ignition coil?

They are available aftermarket as well..

http://www.ebay.com/itm/Ignition-Coil-Honda-ATC200S-ATC-200S-Big-Red-3-Wheeler-1984-NEW-/220934768193?pt=Motors_ATV_Parts_Accessories&hash=item3370bd0641&vxp=mtr
3_wheeler_king
05-22-2013, 01:49 PM
i took it to a cycle shop and they hooked it up to a machine and said that it sends out so many ohms and that it wasent sending out enough
kb0nly
05-22-2013, 02:37 PM
Ok, well did you check it and didn't get spark then i assume? Its cheap enough to buy one and try it, so if they said its bad then go for it!
3_wheeler_king
05-22-2013, 04:29 PM
is it just that little coil? or the whole wiring coming out of the magneto?
barnett468
05-22-2013, 04:39 PM
is it just that little coil? or the whole wiring coming out of the magneto?

Hello

Just click on the blue ebay line in his post 4. I shows exactly ALL you need.
3_wheeler_king
05-22-2013, 05:28 PM
but i dont understand how that would fit my atc
Worden18
05-22-2013, 09:52 PM
Here's a couple of links you need to read thru. If you don't already own a multimeter, buy one and learn how to use it. It's essential to do these electrical checks.

http://www.3wheeler.org/vb/showthread.php?35466-atc-185-no-spark-need-help

http://en.allexperts.com/q/Motorcycle-Repair-837/1984-honda-atc-200s.htm