86Rrider
05-30-2013, 01:15 PM
OK, I've come to the site with the 3-wheeler knowledge here!
I have a 1983 Honda ATC250R (air cooled) that I am wanting to freshen-up the engine while I have it apart to replace the slipping clutch. I of course went right to my Honda dealer to get the needed gaskets and seals, but there were only about 4 of the needed 20 that were still available! So, off to the web and the aftermarket. OK, I find gaskets for top-end rebuilds available, but the lower end the places offer a tube of silicon. No shaft seals anywhere! Gee, guess what I need to stop the huge transmission oil leak? The output shaft seal and shift shaft seal!
So, I'm hopping that someone on here can direct me to where these seals can be obtained from to get my 250R to stop leaking like an old Harley!
Thanks for anything anyone can offer me!
I have a 1983 Honda ATC250R (air cooled) that I am wanting to freshen-up the engine while I have it apart to replace the slipping clutch. I of course went right to my Honda dealer to get the needed gaskets and seals, but there were only about 4 of the needed 20 that were still available! So, off to the web and the aftermarket. OK, I find gaskets for top-end rebuilds available, but the lower end the places offer a tube of silicon. No shaft seals anywhere! Gee, guess what I need to stop the huge transmission oil leak? The output shaft seal and shift shaft seal!
So, I'm hopping that someone on here can direct me to where these seals can be obtained from to get my 250R to stop leaking like an old Harley!
Thanks for anything anyone can offer me!