83 200x motor into an 83 200s wiring question.

[jimmydandy1]

Hi there, Im currently in the process of finishing up a 83 200x motor into an 83 200s & im a little lost with the wire harness clip that holds the yellow & green wires. My 200s has 2 wires, a yellow & a green wire from the stator & the 83 200x only has a yellow wire so now how should hook the green wire? To a common ground or if anyone could shed some light on this issue would be greatly appreciated?

[MNhondaguy]

On the home page of this forum there is links to wiring schematics for these machines. Thanks all I can say without going out into the shop and looking through my harness, sorry.

[MonroeMike]

http://www.3wheelerworld.com/oldsite/files/MagScans/autox.pdf

[jimmydandy1]

Very cool info. Thank you.